The bits have arrived. I now have 6 ECU sockets plus one set of plugs so I can make a test loom for a standard ecu to run side by side with mine on the bench.
I haven't tried the contacts, but they look about right.
Apart from that, everything fits to each other and to the standard ECU so I guess I can confirm the part numbers and supplier in the original post.
Diceman wrote:
Taken from the Mr2 & Alltrac guys:-
http://www.onlinecomponents.com/product/2770890/http://www.onlinecomponents.com/product/2770894/http://www.onlinecomponents.com/product/2770899/toyota ECU plug part #'s for custom harnesses
female receptacle is amp/tyco part # 174518-7
the male plugs are part #'s 174514-6 (16 pin), 174515-6 (22 pin), and 174516-6 (26 pin), with contacts being part #'s 173631 (large) and 173716 (small). you'll need 16 of the larger and 48 of the smaller ones.
http://www.onlinecomponents.com stocks all these parts.
the female plug costs ~$6
the male plugs cost ~$1 each and the pins are about 4-5 cents each and they have no minimum order.
Thought you may find this useful
_________________
If at first you don't suck seed, try drier grain.
Login
Register
FAQ
Search
