www.gt4dc.co.uk
Maintain, Modify and DRIVE your GT-Four


It is currently Fri Mar 29, 2024 8:32 am




Post new topic Reply to topic  [ 837 posts ]  Go to page Previous  1 ... 46, 47, 48, 49, 50, 51, 52 ... 56  Next
Author Message
PostPosted: Sun Mar 16, 2014 11:50 pm 
Offline
Club Staff
User avatar

Joined: Wed Jul 13, 2005 12:06 am
Posts: 4743
Location: Perth, Western Australia
Car Model: ST205
Shame it doesn't fit the Gen 3 :cry:
http://www.atsracing.net/Parts/Details/E-OILPUMP
High Quality
Same manufacturer as the OEM Toyota pump
Lower cost than OEM Toyota pump (yes, it really is a better pump at a cheaper price)
Increased pump volume
Beware of imitations. This is not a stock pump with a couple of washers jammed in the relief spring.
Gen1/2 only. Will not fit Gen3 or Gen4 engines.

Image

_________________
Don
GT4DC Chairman
1994 Toyota Celica GT-Four ST205WRC JDM 269bhp @ 0.9bar
1994 Toyota Celica GT-Four Special GT 590bhp @ 1.8bar
1989 Van Diemen RF88/89 Formula Ford 1600
2008 Nissan Patrol GU 3.0L ZD30DDTi 154bhp


Top
 Profile  
 
PostPosted: Mon Mar 17, 2014 3:39 pm 
Offline
WRC
User avatar

Joined: Tue Dec 09, 2008 6:51 pm
Posts: 1397
Location: Austria
Car Model: None
Hi,

you can use a beams blacktop pump, but you would also need the oil pan nr.1 (alu) from a gen.4 (crank position sensor area)

viewtopic.php?f=13&t=5300&p=40958&hilit=beams+oil+pump#p40958

idle ~3bar, and nearly every time the maximum of ~6bar

greetz

_________________
KEEP COOL UNDER PRESSURE
Image
street legal?.....perhaps in tschibuti


Top
 Profile  
 
PostPosted: Mon Mar 17, 2014 8:41 pm 
Offline
Junior WRC

Joined: Fri Mar 27, 2009 9:39 pm
Posts: 838
Car Model: None
high flow oil pump has landed :)

Image
Image
Image
Image

so guess what im doing over the next few days ;)

_________________
BRD Page

http://www.brooks-brd.co.uk/

https://www.facebook.com/Brooks.Racing.Dev


Top
 Profile  
 
PostPosted: Mon Mar 17, 2014 8:45 pm 
Offline
Club Staff
User avatar

Joined: Mon Mar 26, 2007 5:53 pm
Posts: 1736
Location: Another Shire County
Car Model: ST185
I have, and will be running, a Toga High Volume Oil Pump (OPTO25C-HV) :D
http://www.importperformanceparts.net/imports/toga_oilpumpstoyota.html

_________________
Vice Chairman
1990 White UK Celica ST185 - Project DTM
1997 Cream BMW R1200C (as seen in James Bond "Tomorrow Never Dies")
2005 Jaguar X-type 3.0 Sovereign AWD Automatic
Blood Bikes - https://www.freewheelers.org.uk/


Top
 Profile  
 
PostPosted: Mon Jun 02, 2014 6:36 pm 
Offline
Junior WRC

Joined: Fri Mar 27, 2009 9:39 pm
Posts: 838
Car Model: None
little up date im now running my new racing mounts Image

Image



witch I all so make and sell for all the gt4's

_________________
BRD Page

http://www.brooks-brd.co.uk/

https://www.facebook.com/Brooks.Racing.Dev


Top
 Profile  
 
PostPosted: Wed Jun 04, 2014 9:15 pm 
Offline
Junior WRC

Joined: Fri Mar 27, 2009 9:39 pm
Posts: 838
Car Model: None
Image

Image

Image

Image

Image

Image

Image

cheers bud

Image

http://youtu.be/flK8RXt5lUs


http://youtu.be/Z0giMjqhtpY
http://youtu.be/QZeOH-XogrY

http://youtu.be/YmH3QWH6KnE

_________________
BRD Page

http://www.brooks-brd.co.uk/

https://www.facebook.com/Brooks.Racing.Dev


Top
 Profile  
 
PostPosted: Wed Jun 04, 2014 11:47 pm 
Offline
Club Staff
User avatar

Joined: Wed Jul 13, 2005 12:14 am
Posts: 3265
Location: Camberley, Surrey
Car Model: ST205
Looking good! :)

_________________
GT4DC Events Co-ordinator
1996 ST205 UK


Top
 Profile  
 
PostPosted: Sat Jun 07, 2014 12:58 pm 
Offline
Junior WRC

Joined: Fri Mar 27, 2009 9:39 pm
Posts: 838
Car Model: None
few more photos from Prescott

Image
Image
Image
Image
Image
Image

_________________
BRD Page

http://www.brooks-brd.co.uk/

https://www.facebook.com/Brooks.Racing.Dev


Top
 Profile  
 
PostPosted: Wed Jul 30, 2014 8:45 pm 
Offline
Junior WRC

Joined: Fri Mar 27, 2009 9:39 pm
Posts: 838
Car Model: None
Been doing a bit of work to the Beast and think I have found out why im was still getting a bit of knocking from the rear and felt a bit lose on the rear end even with the poly diff munt fitted, took the diff subframe hanger out and as you can see the bushes have well and truly gone ;( so will be changing them for some nice BRD race bushes :) and as I was there I have all ready fitted the BRD ally diff mount ready :) But this just shows how important it is to replace 20+ year old bushes.


Image
Image
Image
Image


BRD ally diff mount all in ready
Image
Image

just starting on the race rear diff mount hanger bushes

Image
Image
Image
Image
Image
Image

just finished of the rear diff hanger bushes just need to fit it all now for testing
Image
Image
Image

all powder coated ready to fit back in :) next on the list are rear subframe bushes but that a job for over the winter
Image

_________________
BRD Page

http://www.brooks-brd.co.uk/

https://www.facebook.com/Brooks.Racing.Dev


Top
 Profile  
 
PostPosted: Tue Aug 05, 2014 7:04 pm 
Offline
Junior WRC

Joined: Fri Mar 27, 2009 9:39 pm
Posts: 838
Car Model: None
well Diff Subframe is all fitted and back on the road and all I can say is my god lol the back end of the car feels like it is attached to the car lol, very impressed so far, there is a little bit of noise coming from the back but then mine is fully stripped out but apart from that very happy so far so just making a start on a second set and staring on the rest of the bushes for the rear subframe

_________________
BRD Page

http://www.brooks-brd.co.uk/

https://www.facebook.com/Brooks.Racing.Dev


Top
 Profile  
 
PostPosted: Sun Oct 26, 2014 1:14 pm 
Offline
Junior WRC

Joined: Fri Mar 27, 2009 9:39 pm
Posts: 838
Car Model: None
just found this photo of me competing in the Beast in July at shelsley walsh

Image

Image
Image
Image
Image
in car footage of competing today
http://youtu.be/tySgf93wUzI

pics from a photo shoot with JANPANESE PERFROMANCE
Image
Image

_________________
BRD Page

http://www.brooks-brd.co.uk/

https://www.facebook.com/Brooks.Racing.Dev


Top
 Profile  
 
PostPosted: Sun Oct 26, 2014 1:15 pm 
Offline
Junior WRC

Joined: Fri Mar 27, 2009 9:39 pm
Posts: 838
Car Model: None
Dyno day at Surrey dyno and very happy after being road mapped this is the first dyno its had,

Image

Boost
Image


Fuelling
Image

http://youtu.be/COb1Q0q4bZg

_________________
BRD Page

http://www.brooks-brd.co.uk/

https://www.facebook.com/Brooks.Racing.Dev


Top
 Profile  
 
PostPosted: Sun Oct 26, 2014 4:08 pm 
Offline
Club Staff
User avatar

Joined: Wed Jul 13, 2005 12:06 am
Posts: 4743
Location: Perth, Western Australia
Car Model: ST205
Nice flat torque curve must make it very nice to drive.

Who actually did the ECU mapping? Surrey usually supply the equipment and you do it yourself or bring your tame mapper with you.

_________________
Don
GT4DC Chairman
1994 Toyota Celica GT-Four ST205WRC JDM 269bhp @ 0.9bar
1994 Toyota Celica GT-Four Special GT 590bhp @ 1.8bar
1989 Van Diemen RF88/89 Formula Ford 1600
2008 Nissan Patrol GU 3.0L ZD30DDTi 154bhp


Top
 Profile  
 
PostPosted: Sun Oct 26, 2014 5:39 pm 
Offline
Junior WRC

Joined: Fri Mar 27, 2009 9:39 pm
Posts: 838
Car Model: None
yes very nice to drive and all most drives like and N/A till the boost comes in, Greg from Protuner does all my mapping for me, and this is the fist time it been on a dyno since its been road mapped,

_________________
BRD Page

http://www.brooks-brd.co.uk/

https://www.facebook.com/Brooks.Racing.Dev


Top
 Profile  
 
PostPosted: Wed Aug 19, 2015 8:27 pm 
Offline
Junior WRC

Joined: Fri Mar 27, 2009 9:39 pm
Posts: 838
Car Model: None
right bit of an update but not a good 1 :( was out in the car a few months back for a nice drive and things did not go well, all of a sudden after a hard blast I go a full on smoke screen out the exhaust and I mean full on, so pulled over to see what had gone wrong, found some oil in the engine bay that seem to be coming out the gasket on the turbo to down pipe :? so checked the oil level and found the oil was on the very bottom tip of the dip stick not good, so then had a look in the back box and found all my nice clean oil in it, thought that's it engine has gone, so got the car trailer home Big thanks to Wolfy for that :thumbsup: so on Saturday started to strip the turbo off to have a look to see what had gone wrong, took the intake pipe off to see some oil in the intake turn it over to drain it out and a Nut fell out of it :dunno: *bleep* I thought then saw what Nut it was, its the only part of the build iv not made or built my self and it brakes
Image

bloody turbo impeller Nut had come off :( so then had a quick look at the impeller as was thinking the worsted, but found it was all still in 1 piece with no makes on it at all
Image

Image

so took the turbo off to have a better look, and found the rest of my oil
Image

Image

Image

Image

by the look of it I have been very lucky and the engine is all ok, just the turbo seal and bearings have gone,

so next I need to get the exhaust off and drain the oil out both the box's as they are full, and then I need to look at ether I have this rebuilt or just got all out and get a better turbo that will make the 400-450bhp but with a quick spool for competing,

so as im waiting to sort the turbo out, im now making my intercooler pipe work better by making it a full hard pipe set up, just done some mocking up today of how it will go, this is the cold side

as you can see at the moment I have the samco joints witch I want to get rid of
Image

Image
Image
Image

just need to weld it up now then onto the next part

bit more work done on the hard pipe set up, cold side nearly finished just 1 more pipe to weld in place

Image

Image

Image

Image

well found all the oil, this is what happens when your turbo oil seal goes big time

Image

this just came out the exhaust pipe, I have 3 box's to take off and drain yet

Image

url=http://s521.photobucket.com/user/gt4louis/media/gt4louis189/IMAG0501_zpsqjdm0ob1.jpg.html]Image[/url]
Image

crank is out

Image
Image

Crank out and some signs of light scoring, so its of to the machine shop its goes

bit more pipe work for the Beast 4" intake pipe to the turbo that should help it get some air :)
Image
Image

Image
Image

new crank and bearings all fitted

Image

Image

Image

Image

just waiting on new seal for oil pump and an crank now
cold side hard pipe is back after being powdercoated

Image

Image

pretty :) just shim gaps to sort out next

Image

so while im waiting on a custom gear box I have been doing some fabrication work on Decat pipes with Flexi section in ,


so started with a Jig to make the decat up on


Image


bottom parts of the Decat done

Image


top half done

Image


all ready for flexi

Image


flexi fitted in all nice

Image


the fun bit

Image



all done

Image


all cleaned and polished

Image


the inside of the pipe

Image


Image


first test fit of the flexi decat

Image
Image
Image

all good so far but it may need a tweak hear and there, till im happy

new clutch thanks to GT4-play https://www.facebook.com/pages/GT4-Play ... 77?fref=ts

Image
Image

just the gear box now and I can put it back together

_________________
BRD Page

http://www.brooks-brd.co.uk/

https://www.facebook.com/Brooks.Racing.Dev


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 837 posts ]  Go to page Previous  1 ... 46, 47, 48, 49, 50, 51, 52 ... 56  Next


Who is online

Users browsing this forum: No registered users and 33 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Group