www.gt4dc.co.uk
http://www.gt4dc.co.uk/forum/

BRD Built st185 401bhp
http://www.gt4dc.co.uk/forum/viewtopic.php?f=1&t=2877		 Page 48 of 56
Author:  Diceman [ Mon Nov 18, 2013 10:23 pm ]
Post subject:  Re: my st185 rebuld hoping for 400bhp maped at 1.4bar and 39
The turbine housing IMO is a custom job. The Single wastegate turbos only have 5 bolts to the downpipe, have a circular entry point from the exhaust manifold and have a single turbo stay bolt hole (not 2 which would suit either St185 or ST205 bracket like the S148).
Author:  mixer72 [ Mon Nov 18, 2013 10:32 pm ]
Post subject:  Re: my st185 rebuld hoping for 400bhp maped at 1.4bar and 39
If it was coustom why would they stop making them? And i have found out that TT dont make the turbos they just put it all together.
Author:  Sirius [ Tue Nov 19, 2013 11:29 am ]
Post subject:  Re: my st185 rebuld hoping for 400bhp maped at 1.4bar and 39
mixer72 wrote:
If it was coustom why would they stop making them?


Possibly because having things cast is expensive there are usually minimum order quantities and TT probably rightly think that there is limited demand and it will takes ages to shift them.

If they are indeed a bespoke unit then perhaps there is also a problem with the mould used for casting. It could have come to the end of its useful life, then it would be very expensive to resolve.

Ultimately it's all speculation unless we get a reliable source of info from within TT.

I'm quite happy with my unit and looking forward to pushing it further. :D
Author:  mixer72 [ Tue Nov 19, 2013 11:45 am ]
Post subject:  Re: my st185 rebuld hoping for 400bhp maped at 1.4bar and 39
Me to the next mapping im looking at running 1.6-7 bar :)
Author:  mixer72 [ Sat Dec 07, 2013 1:50 pm ]
Post subject:  Re: my st185 rebuld hoping for 400bhp maped at 1.4bar and 39
Nice sunny day so just took the Beast out for the last run for the year. For get just how quick the Beast is :D

Image
Image
Image
Author:  Sirius [ Sat Dec 07, 2013 2:03 pm ]
Post subject:  Re: my st185 rebuld hoping for 400bhp maped at 1.4bar and 39
Cloudy over here - but not too cold. Great weather to start my front end restoration!

Is that a little cover for your oil cooler with handle on the lower left bumper?
Author:  mixer72 [ Sat Dec 07, 2013 2:30 pm ]
Post subject:  Re: my st185 rebuld hoping for 400bhp maped at 1.4bar and 39
yes mate it for when im on the road to keep the oil temp up as with out it I can only get 50c
Author:  Sirius [ Sat Dec 07, 2013 3:59 pm ]
Post subject:  Re: my st185 rebuld hoping for 400bhp maped at 1.4bar and 39
Good stuff :)
Author:  mixer72 [ Sun Dec 15, 2013 2:36 pm ]
Post subject:  Re: my st185 rebuld hoping for 400bhp maped at 1.4bar and 39
first of the 185 polly engine mounts i'm all so looking at making the 205 mounts as well if any 1 is interested

Image
Author:  mixer72 [ Mon Dec 16, 2013 11:43 am ]
Post subject:  Re: my st185 rebuld hoping for 400bhp maped at 1.4bar and 39
rear mount finished


Image

im looking at making these to sell so please pm me if your interested
Author:  mixer72 [ Mon Jan 13, 2014 4:37 pm ]
Post subject:  Re: my st185 rebuld hoping for 400bhp maped at 1.4bar and 39
205 poly engine mounts
Image

intercooler throttle plate with T for dump valve for 185 and 205 just a quick mock up of what it will look like
[url=http://s521.photobucket.com/user/gt4louis/media/20140113_124245_zpsccaba39a.jpg.html]Image
Image

and rear diff mount

Image
Image
Author:  mixer72 [ Sun Mar 16, 2014 6:00 pm ]
Post subject:  Re: my st185 rebuld hoping for 400bhp maped at 1.4bar and 39
some photos for north west rally stage show stand
Image
Image
Image



little update I have an uprated oil pump coming soon so will be fitting that and my baffled sump all ready for competing in the next few months,
Author:  Sirius [ Sun Mar 16, 2014 6:41 pm ]
Post subject:  Re: my st185 rebuld hoping for 400bhp maped at 1.4bar and 39
Car is looking very shiny :)
Author:  TrackToyFour [ Sun Mar 16, 2014 10:16 pm ]
Post subject:  Re: my st185 rebuld hoping for 400bhp maped at 1.4bar and 39
Uprated oil pump?............I'm intrigued.
Author:  mixer72 [ Sun Mar 16, 2014 10:26 pm ]
Post subject:  Re: my st185 rebuld hoping for 400bhp maped at 1.4bar and 39
Hight flow pump from ATS RACING in the usa


http://www.atsracing.net/Parts/Details/E-OILPUMPot a high flow high pressure pump coming from ATS RACING from the usa
Page 48 of 56 All times are UTC + 1 hour
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/