www.gt4dc.co.uk
http://www.gt4dc.co.uk/forum/

BRD Built st185 401bhp
http://www.gt4dc.co.uk/forum/viewtopic.php?f=1&t=2877
Page 51 of 56

Author:  ST185pinjo [ Thu Dec 03, 2015 5:28 pm ]
Post subject:  Re: BRD Built st185 401bhp

at least 2 every season... :D :wink:

Author:  mixer72 [ Thu Dec 03, 2015 7:27 pm ]
Post subject:  Re: BRD Built st185 401bhp

all part of racing :) and im all ways looking to see what other mods and any more power I can tweak out the set up I have

Author:  mixer72 [ Fri Dec 04, 2015 3:07 pm ]
Post subject:  Re: BRD Built st185 401bhp

new mod to the uprated fuel rail, the 5th injector out let is not going to feed a remote fuel pressure gauge


Image

Author:  mixer72 [ Mon Dec 07, 2015 5:32 pm ]
Post subject:  Re: BRD Built st185 401bhp

so putting the rods and pistons back together ready to fit the rings and back in the block

Image


Image


Image


and a bit of engine loom modding


Image

Author:  mixer72 [ Fri Dec 18, 2015 12:13 am ]
Post subject:  Re: BRD Built st185 401bhp

bit of head work and cleaning up with TVIS deleted ready to fit back on


Image

Image

Image

Image

Author:  mixer72 [ Sat Dec 26, 2015 5:08 pm ]
Post subject:  Re: BRD Built st185 401bhp

so a bit more work on the engine today

Image

Image

Image

Image

Image

Author:  mixer72 [ Fri Jan 08, 2016 10:00 pm ]
Post subject:  Re: BRD Built st185 401bhp

so done a bit more work on the car

Image
Image
Image
Image

Author:  mixer72 [ Sat Feb 06, 2016 3:16 pm ]
Post subject:  Re: BRD Built st185 401bhp

Getting there

url=http://s521.photobucket.com/user/gt4louis/media/Mobile%20Uploads/IMAG1861_zpshyce0tev.jpg.html]Image[/url]
Image
Image


Image

Image

Author:  mixer72 [ Sat Feb 13, 2016 5:42 pm ]
Post subject:  Re: BRD Built st185 401bhp

doing a bit of work on the fuel rail set up, mock up of the rail

Image


Image


Image


Image

Image

Image

Image

Author:  ST185pinjo [ Mon Feb 15, 2016 5:54 pm ]
Post subject:  Re: BRD Built st185 401bhp

Dual feed?

Author:  mixer72 [ Mon Feb 15, 2016 6:23 pm ]
Post subject:  Re: BRD Built st185 401bhp

ST185pinjo wrote:
Dual feed?



yes was all ready running duel feed, just im making it better :)

Author:  Sirius [ Tue Feb 16, 2016 1:40 am ]
Post subject:  Re: BRD Built st185 401bhp

Any reason you didn't take the block out of the car for engine assembly?

Must be difficult to have kept everything clean and grit free?

Whats the coating/paint you have used on the fuel rail and water elbow - is an interesting finish. :)

Author:  mixer72 [ Tue Feb 16, 2016 8:47 am ]
Post subject:  Re: BRD Built st185 401bhp

was just quicker for me to do it in the car this time. its not to hard to do in the car, just have to keep cleaning down all the time think I cleaned it about 6 times be for fitting any new parts, the rail was dry blasted then pained in in a textured high temp paint same as the exhaust manifold and water elbow

Author:  mixer72 [ Fri Mar 04, 2016 7:18 pm ]
Post subject:  Re: BRD Built st185 401bhp

fuel rail more or less ready to fit


Image

Image

Image

Author:  mixer72 [ Tue Mar 15, 2016 10:53 pm ]
Post subject:  Re: BRD Built st185 401bhp

getting there


Image


Image


Image


Image


Image

Page 51 of 56 All times are UTC + 1 hour
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/