www.gt4dc.co.uk http://www.gt4dc.co.uk/forum/ |
|
BRD Built st185 401bhp http://www.gt4dc.co.uk/forum/viewtopic.php?f=1&t=2877 |
Page 52 of 56 |
Author: | mixer72 [ Fri Mar 25, 2016 7:37 pm ] |
Post subject: | Re: BRD Built st185 401bhp |
so that's it more or less done just a few bits to tidy up, but its alive https://youtu.be/mlaRaQVXve8 |
Author: | mixer72 [ Sat Mar 26, 2016 7:48 pm ] |
Post subject: | Re: BRD Built st185 401bhp |
so that's it all done, just need to tax it and run the engine in ready for mapping |
Author: | TrackToyFour [ Mon Mar 28, 2016 11:31 pm ] |
Post subject: | Re: BRD Built st185 401bhp |
Very neat! |
Author: | mixer72 [ Sat Apr 02, 2016 6:50 pm ] |
Post subject: | Re: BRD Built st185 401bhp |
new volt gauge fitted, charger temp sensor working and new charging socket fitted |
Author: | mixer72 [ Fri Apr 29, 2016 8:19 pm ] |
Post subject: | Re: BRD Built st185 401bhp |
new switch set up read to fit |
Author: | mixer72 [ Thu Jun 09, 2016 11:51 pm ] |
Post subject: | Re: BRD Built st185 401bhp |
Main thing is the side feed inlet manifold and the tubilar exhaust manifold. The rest is the same |
Author: | Diceman [ Fri Jun 10, 2016 1:04 am ] |
Post subject: | Re: BRD Built st185 401bhp |
And cams? |
Author: | mixer72 [ Fri Jun 10, 2016 8:19 am ] |
Post subject: | Re: BRD Built st185 401bhp |
no same JUN 264 cam and we still not played with the setting on the cams |
Author: | Diceman [ Fri Jun 10, 2016 11:37 am ] |
Post subject: | Re: BRD Built st185 401bhp |
It's interesting that you have lost 50 lb/ft of peak torque and around 1000rpm of spool! Yet gained little bhp but do now have a very nice smooth torque curve. It appears that the second run was probably also done in 3rd? Maybe you are simply running less boost in the mid-range now? It's probably nicer/easier to drive now but I can't help thinking that for hillclimb the earlier shot of torque would be quicker? |
Author: | mixer72 [ Fri Jun 10, 2016 12:01 pm ] |
Post subject: | Re: BRD Built st185 401bhp |
The last map was done on the road and the mapper did say there was more left and could of added more timing but wasent happy doing that on the road need to be done on a dyno |
Author: | mixer72 [ Wed Jul 27, 2016 9:14 pm ] |
Post subject: | Re: BRD Built st185 401bhp |
bit more done all ready for the head to go on tomorrow night |
Page 52 of 56 | All times are UTC + 1 hour |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |