www.gt4dc.co.uk
http://www.gt4dc.co.uk/forum/

BRD Built st185 401bhp
http://www.gt4dc.co.uk/forum/viewtopic.php?f=1&t=2877
Page 55 of 56

Author:  mixer72 [ Fri Dec 15, 2017 5:38 pm ]
Post subject:  Re: BRD Built st185 401bhp

that's should make sure I don't get head lift :)
Image

ecu charge temp sensor boss all welded on

Image
Image
Image
Image

Author:  mixer72 [ Tue Dec 19, 2017 5:28 pm ]
Post subject:  Re: BRD Built st185 401bhp

heads back from the machine shop with new ARP Sleeve washers fitted, and now built back up with the JUN264 cams ready to fit on the block

Image
Image
Image
Image
Image
Image
Image

Author:  mixer72 [ Sat Dec 30, 2017 3:24 pm ]
Post subject:  Re: BRD Built st185 401bhp

bit more wiring done for the 3 port solenoid
Image
Image
Image

and getting the cam pulley cover ready to dip
Image

and head is not on and intake manifold
Image

Author:  mixer72 [ Fri Jan 19, 2018 6:12 pm ]
Post subject:  Re: BRD Built st185 401bhp

bit more work done, new top feed and 1000cc injectors fitted

Image
Image
Image
Image

Author:  mixer72 [ Thu Jan 25, 2018 8:20 pm ]
Post subject:  Re: BRD Built st185 401bhp

let the fun begin, new hard pipe set up getting made from intercooler to throttle body, then new 50mm dump valve to be fitted, then onto the manifold, external 44mm waste gate piping, that's the hard pipe mocked up for the cold side, just need to get it all welded up.
Image
Image
Image
Image

Author:  mixer72 [ Sun Jan 28, 2018 4:12 pm ]
Post subject:  Re: BRD Built st185 401bhp

cold side hard pipe done, just the 50mm dump valve to fit then paint

Image
Image
Image

Author:  mixer72 [ Tue Jan 30, 2018 9:12 pm ]
Post subject:  Re: BRD Built st185 401bhp

cold side hard pipe all done and 50mm dump valve fitted

Image
Image
Image

Author:  mixer72 [ Sun Feb 04, 2018 3:29 pm ]
Post subject:  Re: BRD Built st185 401bhp

few more hours sorting the fuse box out and most of the loom back in the car
Image
Image
Image

Author:  mixer72 [ Wed Feb 14, 2018 4:57 pm ]
Post subject:  Re: BRD Built st185 401bhp

so new manifold getting made :)

Image
Image
Image
Image
Image

Author:  mixer72 [ Sat Feb 17, 2018 4:43 pm ]
Post subject:  Re: BRD Built st185 401bhp

wont be long now :)

Image
Image

Author:  mixer72 [ Sun Feb 18, 2018 10:07 pm ]
Post subject:  Re: BRD Built st185 401bhp

the new manifold for the BRD track car is all done, and soon to be on its way to me, big thanks to Viktor Soara for all the work https://www.facebook.com/Soara-Performa ... 949252751/

Image
Image

Author:  Diceman [ Wed Feb 21, 2018 12:47 pm ]
Post subject:  Re: BRD Built st185 401bhp

Nice,
When is the manifold arriving? I've been chatting to Viktor about getting a T4 Twinscroll.

Author:  mixer72 [ Wed Feb 21, 2018 6:48 pm ]
Post subject:  Re: BRD Built st185 401bhp

hoping some time next week, the work he does is very nice only niggle it having to sort out the payment as has to be sent to Western Union, so have to set all that up witch im doing at the moment

Author:  mixer72 [ Thu Mar 08, 2018 9:12 pm ]
Post subject:  Re: BRD Built st185 401bhp

test fitting the new manifold

Image
Image
Image
Image

Author:  mixer72 [ Sun Mar 11, 2018 1:33 pm ]
Post subject:  Re: BRD Built st185 401bhp

so with the new manifold on, the alternator is a bit to close, so now moving it to below were the A/C compressor us to be.

just need to clean the bracket up and then sort out an adjustable tension bar, and it looks like the betl will just clear the timing cover

Image
Image
Image
Image

and the bonnet fits :)

Image
Image

Page 55 of 56 All times are UTC + 1 hour
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/