www.gt4dc.co.uk
http://www.gt4dc.co.uk/forum/

Project Taurus
http://www.gt4dc.co.uk/forum/viewtopic.php?f=1&t=2908
Page 36 of 37

Author:  Sunny [ Tue Dec 31, 2013 12:47 pm ]
Post subject:  Re: Project Taurus

Hi,

is not an option becouse i want a full fitting box, means

- fit the intake pipe in the chassis
- fit the air filter element
- fit the turbos position

i just want the design of the tte box but except of this it is sub-optimal :lol:

greetz

Author:  Insanity-74 [ Tue Dec 31, 2013 5:41 pm ]
Post subject:  Re: Project Taurus

Do what I did initially and make your own. It's amazing what you can do with extruded polystyrene and fibreglass.

Author:  Insanity-74 [ Tue Dec 31, 2013 5:44 pm ]
Post subject:  Re: Project Taurus

Another option which I thought about was making a metal one. Cutting away a square from the inner wing/wheel arch, make a box out of metal and weld this over the hole, the air filter fits onto this, then make a TTE style top to fit over it......don't know if that make sence?

Author:  Sunny [ Thu Jan 02, 2014 8:57 pm ]
Post subject:  Re: Project Taurus

Hi folks,

doing my own isn'T a good option becouse i never did any moulding or fiberglass work, out of metal is still a option but therefore i need a
good handcrafts man....possible i find one but for now i would go the carbon fiber way and a specialist who can do all the work

welding on the chassis is not an option for me, i want to stay oem in that case, if i doesnt get a solution i just let the oem box stay in position
even i need the space for my custom oil catch can

greedz

Author:  Sunny [ Wed Jun 25, 2014 10:57 am ]
Post subject:  Re: Project Taurus

Hi,

if anyone is interested in my engine, just drop me a message

greetz

Author:  Sunny [ Tue Jun 30, 2015 11:53 pm ]
Post subject:  Re: Project Taurus

Hi folks,

curently i am going for on of these

http://speed-source.net/?wpsc-product=t ... ch-pushrod

should i buy the ST185 or MR2 turbo one....which fit the ST205 gearbox?

hope you can help me

greetz

Author:  DeeCee [ Wed Jul 01, 2015 6:57 am ]
Post subject:  Re: Project Taurus

email them and ask if any difference. I wouldn't think that a pushrod would be different between the gearboxes.

Author:  Sunny [ Wed Jul 01, 2015 11:11 am ]
Post subject:  Re: Project Taurus

Hi,

will do this,

my key problem is the clutch, after the new engine was setup i notices that the clutch opening point was at the floor so the pedal was fully pushed
i simple dediced to set the pedal more away from the floor to get the opening point higher, the shifting is not that exact as oem any more the gear often
went in that easy, now i try this pushrod and set the pedal position new

i'am glad for any ideas of professionals too.....

greetz

Author:  DeeCee [ Thu Jul 02, 2015 7:11 am ]
Post subject:  Re: Project Taurus

if you need measurements of the speed source st185 push rod I am happy to provide

Author:  Sunny [ Thu Jul 02, 2015 10:20 pm ]
Post subject:  Re: Project Taurus

Hi,

thanks for the offert, but curently i have no oem one to compare as my car is at the tuner, better tuned map + 8000rpm now :lol:

greetz

Author:  Sunny [ Sat Jul 04, 2015 2:03 pm ]
Post subject:  Re: Project Taurus

Hi,

ne setup online, 8000rpm, 1,7bar boost, 3rd gear 180km/h :lol:
unfortunelty no dyno sheet

greetz

Author:  DeeCee [ Sun Jul 05, 2015 12:27 pm ]
Post subject:  Re: Project Taurus

took these measurements back in 2013

Image
Image
Image
Image
Image

Author:  Sunny [ Sun Jul 05, 2015 1:18 pm ]
Post subject:  Re: Project Taurus

Hi,

thanks a lot, speed source aint answer me looks like i built my own pushrod
....and this are the measurements of the oem one or longer?

greetz

Author:  DeeCee [ Sun Jul 05, 2015 7:39 pm ]
Post subject:  Re: Project Taurus

The pictures are of the Speed Source push rod. Apparently they answer questions on their facebook page: https://www.facebook.com/pages/Speed-So ... 0234467482

Author:  Sunny [ Sun Jul 05, 2015 10:21 pm ]
Post subject:  Re: Project Taurus

Hi,

thx again 8)

greetz

Page 36 of 37 All times are UTC + 1 hour
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/