www.gt4dc.co.uk http://www.gt4dc.co.uk/forum/ |
|
My Gt-4 celica 1990 http://www.gt4dc.co.uk/forum/viewtopic.php?f=1&t=3913 |
Page 2 of 3 |
Author: | TrackToyFour [ Wed Nov 03, 2010 1:01 am ] |
Post subject: | |
Thanks for sharing the pics of your ST185 re-work. Look forward to following your progress, the more pics the better! |
Author: | Diceman [ Wed Nov 03, 2010 4:31 pm ] |
Post subject: | |
Just a quick question... Your smoking, Have you got an oil feed restrictor on your garrett Ball bearing turbo oil feed? |
Author: | julliæ [ Wed Nov 03, 2010 7:40 pm ] |
Post subject: | |
yes, I have a restrictor, but we think the smoke came because of the oildrain did not go straigh down, that it was to high so the oil didn´t go out of the turbine as easy as it is supost to.. |
Author: | julliæ [ Fri Nov 05, 2010 1:27 am ] |
Post subject: | |
We have been working alot in my car for last days, here are few photos of how he is now Before After The motor will go back in the car this weekend I´ll be posting some photos |
Author: | julliæ [ Sat Nov 06, 2010 4:41 am ] |
Post subject: | |
Pics after todays work Reay to sand it down and paint inside and he stand like this untill tomorrow, when I paint rest of the small parts I´ll post more pics on sunday And, do you know where I can get a carlos sainz front bumper ?? |
Author: | julliæ [ Sat Nov 13, 2010 9:07 am ] |
Post subject: | |
We have been working alot in the electicity there is a relay in the right front fender, it stands Relay cleaner cont on it, is it for the windscreen washer ? Do you know what these 2 sensors do ? The left one have 2 wires in it and conectet with 2 vacum lines to the right one, which is connected to the intake manifold with 2 vacum lines ? Can i take them out ? |
Author: | bozo-merlin [ Sat Nov 13, 2010 11:11 am ] |
Post subject: | |
Pics :It's part of the air co idle up, if you don't use it (and it seems you don't) you could take them out. |
Author: | mixer72 [ Sat Nov 13, 2010 5:19 pm ] |
Post subject: | |
nice car good little read |
Author: | julliæ [ Sun Nov 14, 2010 1:15 am ] |
Post subject: | |
mixer72 wrote: nice car good little read Thanks bozo-merlin wrote: Pics :It's part of the air co idle up, if you don't use it (and it seems you don't) you could take them out.
Thank you, Do you know what this is for ? Here is a picture of the relay in the fender, is it okey to take it ? This is also going away, no use for it after i got standalone, And this is how the celica stands now |
Author: | bozo-merlin [ Sun Nov 14, 2010 10:05 am ] |
Post subject: | |
1st : economy sensor, drive the green and orange led on the rpm gague of the dash 2nd: i think (90% sure) it's for headlight spray on the front bumper, test continuity to check if i am right Both are check engine light free on standard ECU. |
Author: | olafur [ Mon Nov 22, 2010 7:57 pm ] |
Post subject: | |
very nice car |
Author: | Muddy Water [ Mon Nov 22, 2010 10:52 pm ] |
Post subject: | |
Quote: And, do you know where I can get a carlos sainz front bumper ??
From my mate Paul in Poland http://cgi.ebay.co.uk/FIBERGLAS-LAMINATE-BUMPER-CARLOS-SAINZ-CELICA-ST185-GT4-/300495915062 |
Author: | olafur [ Tue Nov 23, 2010 12:52 am ] |
Post subject: | |
júlli hérna getur feingið stuðara og fult af dótti í gt4 http://www.gt4.com.pl/polyurethane/inde ... e&Itemid=1 |
Author: | julliæ [ Tue Feb 01, 2011 8:36 am ] |
Post subject: | |
happy new Year I did go yesterday to my garage to work again in my celica, for the first time in 2011 but i did paint inside of the car and have been puting the interior and the F*** electric !! this is how he looks inside now And here he is in my Garage.. I hope I have time in next week to finish the interior, than I can take it to my work to finish the engine room, make new intercooler pipe from turbine-intercooler, and finish the electricity.. After that My friend comes to map it and after that I can paint it |
Author: | julliæ [ Wed Mar 30, 2011 12:31 am ] |
Post subject: | |
Hi guys.. Took my celica to my work last weekend, forgot my camera but we did make new pipe from turbine to intercooler Than we finished making platform for the MSD system, I just need to paint it and finish the wiring We are waiting now for larger pipes to make from intercooler to Throttle body, after that I can hopefully get the engine running. I did go to the Toyota dealer today and order Carlos sainz Front bumper I´ll get it aftuer 3 weeks Were is best to put the Air fillter ? I have been thinking to put it right on the turbine ? And 2 extra photos |
Page 2 of 3 | All times are UTC + 1 hour |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |