www.gt4dc.co.uk
http://www.gt4dc.co.uk/forum/

My project 205
http://www.gt4dc.co.uk/forum/viewtopic.php?f=1&t=4074
Page 1 of 12

Author:  johnyboy1976 [ Mon Sep 20, 2010 7:20 pm ]
Post subject:  My project 205

Well i ought to add details of my car really - a few might have read about it on my thread on the OC.

Its been in UK since october 03 and has had 2 owners in UK-both OC members.
Its had thousands spent on maintenance and is in pristine condition and has only 60'000 miles on her.
Its got the optional full Recaro interior and chrome "celica" door sills and twin air bags.
Has Blitz Nur spec R system and aussie DP and a Blitz SUS induction kit.
Also has a genuine Veilside bodykit on it-not to my tastes and also has standard bumpers so swapping asap-but keeping skirts as they are nice.

However i have been accumulating parts over the last 2 years and have a massive spec list for her.
Here is a list of the mods i have in my garage/storage room and will be getting fitted asap.However still some bits on he way as i write this

CHASSIS

Tein SS coilovers with EDFC unit
Cusco 4pt lower front brace
J-speed 3 pt upper front brace
J-speed 3 pt rear brace
J-speed fender braces
C-one trunk brace
Aerospeed transmission tunnel brace
K-sport 6 pot/330mm rear brake upgrade kit
Tarox 10 pot/340mm front brake upgrade kit
HEL stainless brake lines
Revolution millenium gold alloys with 235/40x18 Toyo R888 tyres & Buddy club lightweight wheel nuts(track wheels)
Volk 17 " lightweight road wheels with 225 /45 x 17 Falken 452 tyres
Whiteline rear ARB
Alloy adjustable drop links F & R
Pollybush kit

INTERIOR

Bride Gias carbon bucket seats
Momo suede flat bottom wheel
Momo carbon handbrake cover
Momo gearknob/handbrake leather gaitors
Razo alloy pedals
Flocked dash & centre console
Red suede headlining
Luke 3" 5pt racing harness x2
carbon rear view mirror
red wool carpeting
alloy passenger foot rest

ENGINE

C-one exhaust system-front pipe back & 80mm system
C-one low temp stat
C-one rad cooling panel
C-one rad cap
C-one style undertray
Koyo alloy rad
Samco rad hoses
Mocal engine oil cooler and relocation kit with aerospace fittings & braided lines
Mocal gearbox oil cooler and kit with aerospace fittings & braided lines
HKS valve springs
HKS SSQV dump valve
HKS 1.6 mm HG
HKS exhaust manifold
HKS 264 cams
HKS kevlar cam belt
HKS cam gears
HKS 2200cc stroker kit-forged crank/rods & bearings
Wolfkatz 1000cc injectors & rail
Bosch 044 pump
SARD type RJ FPR
SARD fuel collector kit & 265 lph internal pump
255 lph in tank pump
Full braided lines and aerospace fittings for fuel system
Custom FMIC kit and pipework
Garret GT3076 turbo kit with ext wastegate/screamer pipe and custom 3" DP
Ferrea 1mm OS exhaust/intake valves
2x Spal slimline fans
Phenolic intake manifold gasket
Billet alloy 80mm TB - side feed manifold
Motec M4 Pro ECU-launch control/anti lag/data logging
Custom straight intake and filter
Battery relocation kit with carbon battery box
Aquamist 1S water injection system & 5L alloy WI tank

TRANSMISSION

Ikeya sequential shift kit & display unit
Clutchmaster FX600 competition clutch
upgraded gear linkage bushes

EXTERIOR

Projector lights
Clear fronts
Clear sides
Clear rear high level brake light
Carbon bonnet
Carbo tailgate
Carbon rear number plate surround
Carbon WRC wing & raiser blocks
Carbon APR mirrors on custom base plates
Carbon lower front splitter
Carbon TRD style rear spats
Carbon TRD skirts
Alloy flush fit fuel filler cap
PIAA carbon wipers
PIAA horn
PIAA LED side light bulbs
HID kits-inner & outer lights
PIAA angel eye fog lamp kit
FG doors
OMP roll cage

Just need a digital dash and everything is here

Author:  johnyboy1976 [ Mon Sep 20, 2010 7:21 pm ]
Post subject: 

When i got her and the offensive Veilside bodykit - recipt for £4k for paint fit & supply !!!
Image

Had the optional recaros in it
Image

Off with the kit
Image

Cf bonnet & projectors
Image

Milleniums & R888's
Image

The bloody brakes !!!
Image

After Tein coilovers fitted
Image

flush fit alloy fuel filler and aerial removed - also bad attempt at removing Veilside spoiler
Image

Bride seats in
Image

My old wheels - sadly sold
Image

Author:  Diceman [ Mon Sep 20, 2010 9:01 pm ]
Post subject: 

I love that colour john. Strangely the gold wheels also seem to really set it off - normally I would avoid gold but works well.

Car looks sooooooo much better than when you bought it.

Was this the first St205 you had for an age or did you sell that one and purchase this one?

Oh BTW - the idiot waving at lex205 in a bmw early morning last week was me!

Author:  johnyboy1976 [ Mon Sep 20, 2010 9:12 pm ]
Post subject: 

I sold the black one i first had as always wanted a grey one.
Just waiting on the cf bits i have to arrive and my brakes then can at least drive it.
Erin is currently at her dads - bit of a bust up - so unsure if she saw ya :)

Author:  jon379 [ Mon Sep 20, 2010 11:49 pm ]
Post subject: 

that is going to be one nice car when all finished and by the sounds of it quick as well, what power are you hoping im guessing its going to be a track car or tss

Author:  johnyboy1976 [ Mon Sep 20, 2010 11:50 pm ]
Post subject: 

Im hoping for around 500bhp - yer going to be my weekend toy and track day car :)

Author:  Wolf_Tm [ Tue Sep 21, 2010 7:29 am ]
Post subject:  Re: My project 205

johnyboy1976 wrote:

Aerospeed transmission tunnel brace




Uh !?!?!

Hi John,
what's this?
Never read/heard before!
Even googleing I didn't find any info!

Author:  johnyboy1976 [ Tue Sep 21, 2010 8:43 am ]
Post subject: 

Image

Probably out of production now mate - was universal part.

Author:  Wolf_Tm [ Tue Sep 21, 2010 9:16 am ]
Post subject: 

johnyboy1976 wrote:
Image

Probably out of production now mate - was universal part.


Ah see... thanks!

Where is it bolted? Lower oem belt bolts?
Can't understand what is it for... as it is not going to strenghten the body with that shape and in that low position...
Is it just to fix sport multi-point belts?

Author:  johnyboy1976 [ Tue Sep 21, 2010 10:21 am ]
Post subject: 

I had it in my last car - sumo power sell similar things and they are shown to make a difference.
But im no expert - its going to be coming out once cage goes in anyway

Author:  emicen [ Tue Sep 21, 2010 2:15 pm ]
Post subject: 

johnyboy1976 wrote:
I had it in my last car - sumo power sell similar things and they are shown to make a difference.
But im no expert - its going to be coming out once cage goes in anyway


Got any links?

Author:  johnyboy1976 [ Tue Sep 21, 2010 5:19 pm ]
Post subject: 

No not that i can find but i bought mine on the back of reading a article in a jap mag

Author:  johnyboy1976 [ Tue Sep 21, 2010 5:26 pm ]
Post subject: 

Nearest i can find is this
http://www.sumopower.com/product/view/1410

Author:  emicen [ Wed Sep 22, 2010 12:16 pm ]
Post subject: 

You see the problem is its the mountings of such a thing that define whether or not it will work. In this instance, bolts perpendicular to the plane they're trying to stiffen, hence subject to tension/compression.

Really you want them to be in shear. Much harder to shear a bolt than stretch it.

Author:  johnyboy1976 [ Thu Sep 30, 2010 5:57 pm ]
Post subject: 

well after 12 months my discs and bells arrived today :)
Just looking forward to my cf bits arriving now

Page 1 of 12 All times are UTC + 1 hour
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/