That's great news mate.
What was it in the trouble areas? I'm just curious
| www.gt4dc.co.uk http://www.gt4dc.co.uk/forum/ |
|
| 86.25mm Pistons http://www.gt4dc.co.uk/forum/viewtopic.php?f=1&t=5159 |
Page 1 of 1 |
| Author: | Sirius [ Fri Sep 16, 2011 2:01 pm ] |
| Post subject: | 86.25mm Pistons |
I've had my engine measured up by the engine builder and it has been found that whilst its nice and thick where it needs to be it does require a rebore. It only needs to go out to 86.25mm so I'd like to source pistons of those size rather than going for 86.5 which whilst are more readily available will weaked the block unnessicarily. CP seem to have a custom option for the 86.25mm pistons - does anyone know where I could actually source these from? |
|
| Author: | Diceman [ Fri Sep 16, 2011 5:12 pm ] |
| Post subject: | |
Tb developments IIRC http://www.tbdevelopments.com/catalog/p ... cts_id=199 I have some if you wanted to have a looksie before buying. |
|
| Author: | dale [ Fri Sep 16, 2011 7:46 pm ] |
| Post subject: | |
yep, tbdev do a custom cp |
|
| Author: | Sunny [ Fri Sep 16, 2011 9:08 pm ] |
| Post subject: | |
Hi, wössner has a 86,25 bore but the CR is down to 8:1 http://www.woessner-kolben.de/fileadmin ... g_2011.pdf greetz |
|
| Author: | Dave P [ Tue Sep 20, 2011 3:20 pm ] |
| Post subject: | |
That's great news mate. What was it in the trouble areas? I'm just curious
|
|
| Author: | Sirius [ Tue Sep 20, 2011 10:13 pm ] |
| Post subject: | |
Hi Dave, I haven't got the figures from Jon yet - will ask him tomorrow and let you know. |
|
| Page 1 of 1 | All times are UTC + 1 hour |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|