www.gt4dc.co.uk :: View topic - RISINGT4

www.gt4dc.co.uk http://www.gt4dc.co.uk/forum/

RISINGT4 http://www.gt4dc.co.uk/forum/viewtopic.php?f=1&t=5204	Page 1 of 8

Author:	banzaibaz [ Wed Oct 19, 2011 7:31 pm ]
Post subject:	RISINGT4
This is the before pic when i got her. PARTS LIST OF PROJECT RISING.... Jdm forged engine..... Full 3" Ti strait through Ex (not looked for a make yet)..... C-ONE 4 Branch.....and a s/s 4/B rams horn.... 3" V band De-cat.... RMR plenum (side feed)...... TT fuel pump...... Cusco diff,upper brace,lower brace,rear brace...... Trd skirts an rear wing.... Blitz sonic power (also huge cossie filter)....... Trd Quick shift...... Defi 115mm rev,60mm oil temp,oil pres,water temp,boost, ext temp, 52mm fuel pres,inlet vac ....... Jdm Shift light..... Bee r ign cut.... C-One ECU.......looking for an upgrade.... Jdm Hybrid CT26.......looking for a =another turbo to run a diff set up C-One full S/S B/lines....... Goodridge bias,s/s brake,clutch lines...... 5x114.3 hubs......not spacers 18" rotor gtr`s....... 17" Rays F-Zero`s....... Race nuts...... 6 pots...... Pair of cobra pro buckets..... 3" 6 point willans aero race harness`s....... Sparco race wheel...... Greddy boost cont....... Greddy Timer ...... Greddy remote........ Huge Trust, bar + plate front mount 4" Thick....... Twin Waste gates ...... Carbon diffusers + vortex..... Oil coolers ....... Cusco P/steer bottle...... Cusco catch can...... Full samco silly + ally pipes (inter)........ Radtec race rad and 3ltr header.... race swirl pot header system........ Earls + Goodridge fittings everywhere ....... Race fly wheel and hks hyper clutch....... Modified body parts..... Jdm struts and springs (unknown make)+jdm fully adj coilovers unknown TRD Adj Top mounts fr + r....... ARB`s..... Most of car will end up poly`ed....... And all the other bits i cant remember, ive finished building my little workshop and Nigel came over at the weekend and we got to work getting the wheels off and putting it up in the air so it will be full steam ahead in the next couple of weeks, first im going to strip off all the parts im going to sell on and then start the build up....Deep breath....sigh...

Author:	Muddy Water [ Wed Oct 19, 2011 9:56 pm ]
Post subject:
Quote: ..Nigel came over at the weekend ... and saw the workshop (excellent job ) and the Aladins cave of parts

Author:	TrackToyFour [ Wed Oct 19, 2011 10:35 pm ]
Post subject:
An impressive list and most people would be very happy with that spec so I must ask the question ............ what is your objective with all this work? Is it still not fast enough

Author:	johnyboy1976 [ Thu Oct 20, 2011 7:27 pm ]
Post subject:
Muddy Water wrote: Quote: ..Nigel came over at the weekend ... and saw the workshop (excellent job ) and the Aladins cave of parts He surely cant have more bits than me Good project btw

Author:	banzaibaz [ Fri Oct 21, 2011 6:44 pm ]
Post subject:
No id never be able to hide away as many parts as you JB lol. Hi Don its definitely fast enough but you know what boys and there weekend toys are like maybe its that Retro 90`s JDM feeling im looking for :wink wink:

Author:	mixer72 [ Sun Oct 23, 2011 4:00 pm ]
Post subject:
look forward to seeing this comeing on

Author:	johnyboy1976 [ Sun Oct 23, 2011 4:54 pm ]
Post subject:
This going to be a track car or fast road ?? My cage and FG doors might be of interest

Author:	Sunny [ Sun Oct 23, 2011 7:18 pm ]
Post subject:
Hi, this thread is useless without pics greetz

Author:	banzaibaz [ Mon Oct 24, 2011 5:06 pm ]
Post subject:
Sunny wrote: Hi, this thread is useless without pics greetz Ha ha... cars/mech all day long..... laptops out the window....not got a clue...the only reason i can post pics on the OC is cos im a paid up member and that make my life easy lol

Author:	Meurz [ Tue Oct 25, 2011 5:51 pm ]
Post subject:
It's easy; host your pics online for free (Photobucket, tinypic, etc) and put the [img]url[/img] code in your post here: ^ Quote my post to see what I mean

Author:	mixer72 [ Tue Oct 25, 2011 8:51 pm ]
Post subject:
Meurz wrote: It's easy; host your pics online for free (Photobucket, tinypic, etc) and put the [img]url[/img] code in your post here: ^ Quote my post to see what I mean thats gong to hert when he lands lol

Author:	banzaibaz [ Tue Nov 01, 2011 6:19 pm ]
Post subject:
Been to busy to get pics but i made a start today and was very surprised i didnt run into 1 problem so in 4hrs i stripped the whole front end off,under trays,inner arches,body kit,full fluid drain all of the c/c system,mani,turbo,cat,d/pipe,alt,rad and fans all the cusco stuff top and bottom,and not 1 rusty/seized nut/bolt most had been replaced with what look like stainless jobbies,also came across 4 what look like defi sensors dotted about so all in all a very productive couple of hours.....pics coming soon lol...

Author:	banzaibaz [ Wed Dec 14, 2011 7:28 pm ]
Post subject:
Not much has been done since my last post been busy at work but hoping to strip the rest of the parts off over xmas then i can start the rebuild ( i miss driving my ST205 lol )

Author:	banzaibaz [ Mon Jan 02, 2012 8:38 pm ]
Post subject:
Just an update really, spent a few hours before xmas stripping the front end and everything from the exhaust side outwards then today had another couple of hours stripping out the inlet manifold (what a bleep of a job) so just a few more parts to remove then full tilt ... on with the build,

Author:	Kris [ Mon Jan 02, 2012 11:42 pm ]
Post subject:
Quote: .....pics coming soon lol...

Page 1 of 8	All times are UTC + 1 hour
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/