I guess that's for an ST185? Pics would be welcome
| www.gt4dc.co.uk http://www.gt4dc.co.uk/forum/ |
|
| RISINGT4 http://www.gt4dc.co.uk/forum/viewtopic.php?f=1&t=5204 |
Page 7 of 8 |
| Author: | TrackToyFour [ Thu Oct 24, 2013 8:26 am ] |
| Post subject: | Re: RISINGT4 |
I guess that's for an ST185? Pics would be welcome
|
|
| Author: | Sirius [ Thu Oct 24, 2013 5:44 pm ] |
| Post subject: | Re: RISINGT4 |
wolfiehere wrote: I have a tte rear subf4ame here in my workshop, complete with arms and magnesum billet mounts if you want photos We love photos feel free to post them up! |
|
| Author: | banzaibaz [ Sat Nov 02, 2013 12:25 pm ] |
| Post subject: | Re: RISINGT4 |
yey can get on the net now @ the workshop. adrian is already putting his eng doct to good use he has had some great ideas and cant wait to get started. ive invested a bit more in the tig department as this is heavily involved in the processes well apart from the prototypes, ive been doing some other bread and butter jap stuff but this weekend is all for my selfish self and my ST205 lol, im going to try and get the intercooler pipes welded up finish installing the rear brake lines and get some wiring done sensors mainly. pics to follow.. |
|
| Author: | banzaibaz [ Mon Feb 10, 2014 10:19 pm ] |
| Post subject: | Re: RISINGT4 |
Quick pic update (heavy lol) still been busy with the workshop but found myself more and more on the 4 this week. break down after moc up          oh and my other new toy RSV1000SP 
|
|
| Author: | Sirius [ Mon Feb 10, 2014 11:34 pm ] |
| Post subject: | Re: RISINGT4 |
Looking good Baz. I am hoping to get down to the workshop very shortly, I have a few little jobs I'd like to get sorted on the underside of the car - rust-proofing and tidying mainly. |
|
| Author: | banzaibaz [ Tue Feb 11, 2014 5:54 pm ] |
| Post subject: | Re: RISINGT4 |
No probs just let me know when, i had a look at your build thread yesterday and if id seen it earlier you could of had all those parts you refurbed as the ones i removed off mine where mint,any joy with the PM. fabbed up the screamers this morning all i can say is its a good job the ST205 has a steel bonnet vent lol.    
|
|
| Author: | Muddy Water [ Wed Feb 12, 2014 12:41 am ] |
| Post subject: | Re: RISINGT4 |
Nice work Baz  Need to pop down and see you at some point (with some bracketery  )Once I get myself mobile again and able to dig around in the garage. Nice toy.... we'll be calling you the Roman Emperor next or would that be BanzaiBaggie 
|
|
| Author: | TrackToyFour [ Wed Feb 12, 2014 1:04 am ] |
| Post subject: | Re: RISINGT4 |
You going for bonnet vented screamers Barry? They were all the rage at the Autosport Show last month on the drift cars Not my personal favourite location but good if you want to BBQ small feral children and furry animals!
|
|
| Author: | banzaibaz [ Wed Feb 12, 2014 1:13 pm ] |
| Post subject: | Re: RISINGT4 |
LOL Not my fave either Don but i was running out of usable space as ive always taken into consideration that i might have to work on it once in a while lol Nigel no probs you know your All more than welcome, ive got some more of those milspec/amphenol-aerospace-motorsport connectors coming with diff pin config and specs but the one ive got for you already is in s/steel bulkhead mounted twist seal +30 pin waterproof etc they retail for approx 250 its madness good job i have a free supply wink wink lol |
|
| Author: | Diceman [ Thu Feb 13, 2014 4:31 pm ] |
| Post subject: | Re: RISINGT4 |
Nice work, You need a couple of these IMHO http://www.bersy.com/eng/product_rain_c ... xhaust.asp otherwise I have visions of the first WG dump after rain resulting in a windscreen full of water. The other possible issue (I had considered the same WG setup TBH) is that I believe the fan heater sucks in air by the bonnet/windscreen interface. You may end up filling the car with fuel rich part burned gases unless I have missed a cunning plan 
|
|
| Author: | Sunny [ Thu Feb 13, 2014 10:35 pm ] |
| Post subject: | Re: RISINGT4 |
Hi, great work and lol to a couple of these:lol: what is that thing which also houses the pressure regulator? greetz |
|
| Author: | banzaibaz [ Thu Feb 13, 2014 11:28 pm ] |
| Post subject: | Re: RISINGT4 |
Sunny that is a converted bmw v8 race cast alloy header/overflow tank it had the right design/shape/fittings for what i needed, Hi JP i can rotate these outlets if need be and join into one and release down under the g/box, but the aesthetics are rubbish  also modified the hydro handbrake with an electronic actuator release mechanism today i might rig this to the launch control just for fun factor  =
|
|
| Author: | Sunny [ Sat Feb 15, 2014 5:19 pm ] |
| Post subject: | Re: RISINGT4 |
Hi, got it greetz |
|
| Author: | banzaibaz [ Sun Feb 16, 2014 8:42 am ] |
| Post subject: | Re: RISINGT4 |
Yesterday i changed the pedal box to take the existing modified oe toyota throttle cable to make it easier for quick change/maintenance, finished all the brake line installation, today onto the wiring, then me and Chris are going to do all the pre checks etc before first start up hopefully in the next 2 weeks then just the body work to go back on. |
|
| Author: | Nibbles [ Sun Mar 23, 2014 6:20 pm ] |
| Post subject: | Re: RISINGT4 |
https://dl.dropboxusercontent.com/u/831 ... iagram.png |
|
| Page 7 of 8 | All times are UTC + 1 hour |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|
