www.gt4dc.co.uk http://www.gt4dc.co.uk/forum/ |
|
Fitting Side Skirts http://www.gt4dc.co.uk/forum/viewtopic.php?f=1&t=6380 |
Page 1 of 1 |
Author: | jgtcracer [ Sat Mar 09, 2013 4:35 pm ] |
Post subject: | Fitting Side Skirts |
Got some trd style sideskirts and am currently trying to fit them but having a few problems. Seen a few people using 3m attachment tape on skirts so got some to give it a try and im having no joy with it, just doesnt seem sticky enough. Will low temperatures outside cause them to be less sticky? Will warming both surfaces help with adhesion? there are holes for screwing the skirt on inside the front arch but thats it any tips fitting skirts would be much appreciated. Marcus |
Author: | Gary ST165 [ Sat Mar 09, 2013 4:52 pm ] |
Post subject: | Re: Fitting Side Skirts |
i have often heard mention of a product called "tiger seal"... that is as far of my knowledge of faffing goes |
Author: | jgtcracer [ Sat Mar 09, 2013 5:08 pm ] |
Post subject: | Re: Fitting Side Skirts |
tiger seal seems the way forward, my concern with using slow setting sealant is that its hard to use tape to get a good fit on parts of the skirt |
Author: | two_OH_five [ Sat Mar 09, 2013 6:13 pm ] |
Post subject: | Re: Fitting Side Skirts |
There are various grades of 3m tape from pound shop rubbish to the professional grade red stuff Bear in mind that genuine skirts are fitted with plastic fasteners drilled into the sills so tape is unlikely to produce a great result Ideally the side skirt wants to be good and warm to fit it - not so Mich for the tape but so the moulding itself is flexible and better able to conform to the curvature of the car Ideally I would use either tiger seal or sikaflex it trying to fix something like that without mechanical fasteners, especially if it's grp |
Page 1 of 1 | All times are UTC + 1 hour |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |