www.gt4dc.co.uk http://www.gt4dc.co.uk/forum/ |
|
2009 http://www.gt4dc.co.uk/forum/viewtopic.php?f=1&t=6447 |
Page 7 of 10 |
Author: | ali86 [ Sun Mar 22, 2015 11:45 am ] |
Post subject: | Re: 5yrs on axle stands and counting |
Do you gave a build thread? When do you think it'll 've done by? |
Author: | 96st205 [ Sun Mar 22, 2015 1:44 pm ] |
Post subject: | Re: 5yrs on axle stands and counting |
not at the min an good knows lol |
Author: | 96st205 [ Mon Mar 23, 2015 10:30 am ] |
Post subject: | Re: 5yrs on axle stands and counting |
ali86 wrote: Looks almost done. What's left of it? Like the manifold cough cough.... we are a little way off yet |
Author: | ali86 [ Tue Mar 24, 2015 4:42 pm ] |
Post subject: | Re: 5yrs on axle stands and counting |
Nice big workshop:) Still looks more done than mine lol |
Author: | ali86 [ Tue Mar 24, 2015 7:31 pm ] |
Post subject: | Re: 5yrs on axle stands and counting |
Bought 2ndhand race technologies Dash 2. Wiring still ::?:? |
Author: | 96st205 [ Tue Mar 24, 2015 8:29 pm ] |
Post subject: | Re: 5yrs on axle stands and counting |
ooooo like that dash!! |
Author: | Sirius [ Tue Mar 24, 2015 11:44 pm ] |
Post subject: | Re: 5yrs on axle stands and counting |
I run the Race Technology Dash 3 and DL1 Datalogger on my car. Its excellent kit but somewhat tricky to initially setup. Happy to share what I know when you get to that stage. Will you be running the Dash2 as a stand alone or with a DL1 as well? |
Author: | ali86 [ Wed Mar 25, 2015 3:47 pm ] |
Post subject: | Re: 5yrs on axle stands and counting |
Just the dash 2 on its own. Thanks will keep it in mind. Need to get and ecu interface sorted. Manage to power it up for the time being. The mileage is on 53k would like to set it to 100k as that's what it was when I took it off the road... Not that it really matters I guess. Won't be selling it on |
Author: | Treacle [ Sat Mar 28, 2015 7:30 pm ] |
Post subject: | Re: 5yrs on axle stands and counting |
Project is looking great Ali |
Author: | ali86 [ Tue Mar 31, 2015 8:01 pm ] |
Post subject: | Re: 5yrs on axle stands and counting |
Cheers dude Update Not the most accurate way of measuring and Not the most accurate scalesbut you get the idea |
Author: | Davem45r [ Tue Mar 31, 2015 9:13 pm ] |
Post subject: | Re: 5yrs on axle stands and counting |
Nice - where is the c/f prop from and is it st205 specific or modified to fit? |
Author: | DeeCee [ Tue Mar 31, 2015 9:53 pm ] |
Post subject: | Re: 5yrs on axle stands and counting |
If I remember correctly from Wolf_TM's fitting fun with CF prop shaft, he removed the middle mount located in the centre of the trans tunnel to make clearance for the CF prop shaft. Ali, can you let us know with picture what you did? This is of interest to a number of people and the information would be greatly appreciated |
Author: | Treacle [ Tue Mar 31, 2015 10:27 pm ] |
Post subject: | Re: 5yrs on axle stands and counting |
Very interesting, have not seen a cf prop for the st205 before - where is it from? Hell of a weight saving! |
Author: | ali86 [ Tue Mar 31, 2015 10:46 pm ] |
Post subject: | Re: 5yrs on axle stands and counting |
Its a st205 specific carbon propshaft. Was going to get a aluminium one but after lots of phone calls around no one wanted to make a single piece version that long. The carbon one's do have a 3 year life btw. Don't exactly know what it is that goes wrong. Some people are using theirs over 3 years but I don't know how much use it gets and also varies from different manufactures. Both parties were a little cloudy about what actually goes wrong. I have no 2nd skin under the car that houses the captive nuts for the oem centre bearing brackets. Even then it's still about 20 mm away from the nearest metal. Wolf tm bought his from acpt, who have now sold the rights to sell to powertrain USA. I bought mine from driveshaft shop as it was about 600 dollars cheaper and they used a thicker tube. Think acpt one was 2.79 in vs 3.25 of dss. By the time it came over here it set me back just under £1100. Some other nrws... Dummy caliper bracket (version2)done, 326mm disc looks time under 17 inch wheel |
Author: | ali86 [ Thu Apr 16, 2015 12:31 am ] |
Post subject: | Re: 2009 |
Slowly .....:| |
Page 7 of 10 | All times are UTC + 1 hour |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |