www.gt4dc.co.uk
http://www.gt4dc.co.uk/forum/

2009
http://www.gt4dc.co.uk/forum/viewtopic.php?f=1&t=6447
Page 7 of 10

Author:  ali86 [ Sun Mar 22, 2015 11:45 am ]
Post subject:  Re: 5yrs on axle stands and counting

Do you gave a build thread? When do you think it'll 've done by?

Author:  96st205 [ Sun Mar 22, 2015 1:44 pm ]
Post subject:  Re: 5yrs on axle stands and counting

not at the min an good knows lol

Author:  96st205 [ Mon Mar 23, 2015 10:30 am ]
Post subject:  Re: 5yrs on axle stands and counting

ali86 wrote:
Looks almost done. What's left of it? Like the manifold :)

cough cough....
ImageImage

we are a little way off yet :-)

Author:  ali86 [ Tue Mar 24, 2015 4:42 pm ]
Post subject:  Re: 5yrs on axle stands and counting

Nice big workshop:)
Still looks more done than mine lol

Author:  ali86 [ Tue Mar 24, 2015 7:31 pm ]
Post subject:  Re: 5yrs on axle stands and counting

ImageImage

Bought 2ndhand race technologies Dash 2. Wiring still ::?:?

Author:  96st205 [ Tue Mar 24, 2015 8:29 pm ]
Post subject:  Re: 5yrs on axle stands and counting

ooooo like that dash!!

Author:  Sirius [ Tue Mar 24, 2015 11:44 pm ]
Post subject:  Re: 5yrs on axle stands and counting

I run the Race Technology Dash 3 and DL1 Datalogger on my car. Its excellent kit but somewhat tricky to initially setup.

Happy to share what I know when you get to that stage. Will you be running the Dash2 as a stand alone or with a DL1 as well?

Author:  ali86 [ Wed Mar 25, 2015 3:47 pm ]
Post subject:  Re: 5yrs on axle stands and counting

Just the dash 2 on its own.

Thanks will keep it in mind. Need to get and ecu interface sorted. Manage to power it up for the time being.

The mileage is on 53k would like to set it to 100k as that's what it was when I took it off the road... Not that it really matters I guess. Won't be selling it on
Image

Author:  Treacle [ Sat Mar 28, 2015 7:30 pm ]
Post subject:  Re: 5yrs on axle stands and counting

Project is looking great Ali :)

Author:  ali86 [ Tue Mar 31, 2015 8:01 pm ]
Post subject:  Re: 5yrs on axle stands and counting

Cheers dude :)

Update
ImageImageImageImage

Not the most accurate way of measuring and Not the most accurate scalesbut you get the idea

Author:  Davem45r [ Tue Mar 31, 2015 9:13 pm ]
Post subject:  Re: 5yrs on axle stands and counting

Nice - where is the c/f prop from and is it st205 specific or modified to fit?

Author:  DeeCee [ Tue Mar 31, 2015 9:53 pm ]
Post subject:  Re: 5yrs on axle stands and counting

If I remember correctly from Wolf_TM's fitting fun with CF prop shaft, he removed the middle mount located in the centre of the trans tunnel to make clearance for the CF prop shaft. Ali, can you let us know with picture what you did? This is of interest to a number of people and the information would be greatly appreciated :)

Author:  Treacle [ Tue Mar 31, 2015 10:27 pm ]
Post subject:  Re: 5yrs on axle stands and counting

Very interesting, have not seen a cf prop for the st205 before - where is it from? Hell of a weight saving!

Author:  ali86 [ Tue Mar 31, 2015 10:46 pm ]
Post subject:  Re: 5yrs on axle stands and counting

Its a st205 specific carbon propshaft.
Was going to get a aluminium one but after lots of phone calls around no one wanted to make a single piece version that long. The carbon one's do have a 3 year life btw. Don't exactly know what it is that goes wrong. Some people are using theirs over 3 years but I don't know how much use it gets and also varies from different manufactures. Both parties were a little cloudy about what actually goes wrong.

I have no 2nd skin under the car that houses the captive nuts for the oem centre bearing brackets. Even then it's still about 20 mm away from the nearest metal.

Wolf tm bought his from acpt, who have now sold the rights to sell to powertrain USA.
I bought mine from driveshaft shop as it was about 600 dollars cheaper and they used a thicker tube. Think acpt one was 2.79 in vs 3.25 of dss.

By the time it came over here it set me back just under £1100.
ImageImage

Some other nrws...
Image
Dummy caliper bracket (version2)done, 326mm disc looks time under 17 inch wheel

Author:  ali86 [ Thu Apr 16, 2015 12:31 am ]
Post subject:  Re: 2009

Slowly .....Image:|

Page 7 of 10 All times are UTC + 1 hour
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/