| www.gt4dc.co.uk http://www.gt4dc.co.uk/forum/ |
|
| 4evacelica work http://www.gt4dc.co.uk/forum/viewtopic.php?f=1&t=6458 |
Page 1 of 1 |
| Author: | martinking6 [ Sun Apr 07, 2013 6:37 pm ] |
| Post subject: | 4evacelica work |
As promised and long overdue I am going to do a little thread on repairs done now and in the future Steel driveshaft guard bent well out of shape  Engine out  Cracked exedy clutch friction plate   Rear and front crank seal starting to leak   Power steering pump main pivot bolt missing  Martin |
|
| Author: | Insanity-74 [ Sun Apr 07, 2013 7:28 pm ] |
| Post subject: | Re: 4evacelica work |
Whats your opinion on Exedy clutches? |
|
| Author: | Sirius [ Sun Apr 07, 2013 7:32 pm ] |
| Post subject: | Re: 4evacelica work |
I am forming an opinion based on the picture! |
|
| Author: | martinking6 [ Sun Apr 07, 2013 7:42 pm ] |
| Post subject: | Re: 4evacelica work |
Ive never had any issues with exedy clutches apart from there a bit smelly if slipped but theres more to this scenario as when it has been fitted by whoever the master cylinder hasnt been adjusted to compensate for the new clutch so the clutch has been dragging badly which won`t of helped the situation it was apparently very bad to engage and change gears so maybe that has contributed to the failure Martin |
|
| Author: | martinking6 [ Sun Apr 07, 2013 7:56 pm ] |
| Post subject: | Re: 4evacelica work |
Engine base timing out by 1 tooth on each of the cam pulleys      Damage to lower timing belt cover   Cause of the damage the guide plate for the timing belt is bent so has been cutting through the cover  Martin |
|
| Author: | martinking6 [ Thu Jun 13, 2013 9:36 pm ] |
| Post subject: | Re: 4evacelica work |
Magnecore plug lead failed  Leaking block core plug   Next pics show the internal condition of the engine as it all comes apart, etc head gasket had blown on this particular engine              Martin |
|
| Author: | martinking6 [ Thu Jun 13, 2013 10:29 pm ] |
| Post subject: | Re: 4evacelica work |
    Sanding block for checking/cleaning mating faces   And so begins the big clean up, block was thoroughly cleaned first then mating faces, etc     New core plug fitted  Full toyota engine gasket set was a cheaper option due to need so many seals and gaskets   Martin |
|
| Author: | martinking6 [ Fri Jun 28, 2013 12:15 am ] |
| Post subject: | Re: 4evacelica work |
Refurbed head       New cam seals installed  Martin |
|
| Page 1 of 1 | All times are UTC + 1 hour |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|