| www.gt4dc.co.uk http://www.gt4dc.co.uk/forum/ |
|
| Carlos 2939 http://www.gt4dc.co.uk/forum/viewtopic.php?f=1&t=6655 |
Page 1 of 2 |
| Author: | toyokid [ Sat Jul 27, 2013 8:23 am ] |
| Post subject: | Carlos 2939 |
Getting ready to map the MOTEC http://www.youtube.com/watch?v=zCuAuOiIEck A few details available on my Facebook page https://www.facebook.com/groups/378693912193202/ Stephen |
|
| Author: | two_OH_five [ Sun Jul 28, 2013 11:57 am ] |
| Post subject: | Re: Carlos 2939 |
The old girl looks fine Stephen but I must admit the mini in the video tweaks my interest! |
|
| Author: | toyokid [ Sun Jul 28, 2013 1:37 pm ] |
| Post subject: | Re: Carlos 2939 |
Mapping Thursday next |
|
| Author: | squarepants [ Sun Jul 28, 2013 7:16 pm ] |
| Post subject: | Re: Carlos 2939 |
Hi Steve, How do you find the 205 brake setup? I'm having the same installed at the moment and very interested to hear your thoughts on how they perform over standard.. |
|
| Author: | toyokid [ Sun Jul 28, 2013 8:55 pm ] |
| Post subject: | Re: Carlos 2939 |
squarepants wrote: Hi Steve, How do you find the 205 brake setup? I'm having the same installed at the moment and very interested to hear your thoughts on how they perform over standard.. No comparison, but with the thick end of 400bhp one needs to stop sharpish. My GT86 has smaller brakes, but only 200bhp and a lot lighter. Stephen |
|
| Author: | gt4col [ Sun Jul 28, 2013 9:06 pm ] |
| Post subject: | Re: Carlos 2939 |
What front discs have you went for and how did you overcome the gap between the inner pistons and the disc,? Sent from my GT-N7100 using Tapatalk 2 |
|
| Author: | toyokid [ Sun Jul 28, 2013 9:24 pm ] |
| Post subject: | Re: Carlos 2939 |
I used Lexus IS200 discs, circa 300mm x 32mm. Re-drilled the PCD to 5 x 100 Had to shave a bit off the mating surface of the calliper. Details on the facebook page. https://www.facebook.com/groups/378693912193202/ Stephen |
|
| Author: | squarepants [ Sun Jul 28, 2013 10:32 pm ] |
| Post subject: | Re: Carlos 2939 |
^^ me too. my 205 brake setup is from Alex' Wasp |
|
| Author: | toyokid [ Sun Jul 28, 2013 10:40 pm ] |
| Post subject: | Re: Carlos 2939 |
squarepants wrote: ^^ me too. my 205 brake setup is from Alex' Wasp Same setup |
|
| Author: | toyokid [ Mon Aug 05, 2013 6:48 am ] |
| Post subject: | Re: Carlos 2939 |
41mm Bilsteins ready to be fitted [url]http://s1267.photobucket.com/user/toyokid/media/IMG_0813.jpg.html?filters[user]=129198947&filters[recent]=1&sort=1&o=1[/url] |
|
| Author: | toyokid [ Mon Aug 05, 2013 6:50 am ] |
| Post subject: | Re: Carlos 2939 |
205 chargecooler atop 185 [url]http://s1267.photobucket.com/user/toyokid/media/IMG_1728-1.jpg.html?filters[user]=129198947&filters[recent]=1&sort=1&o=2[/url] |
|
| Author: | toyokid [ Mon Aug 05, 2013 6:52 am ] |
| Post subject: | Re: Carlos 2939 |
Apexi RHX6 turbo ready to be fitted [url]http://s1267.photobucket.com/user/toyokid/media/IMG_0842.jpg.html?filters[user]=129198947&filters[recent]=1&sort=1&o=3[/url] |
|
| Author: | toyokid [ Mon Aug 05, 2013 6:53 am ] |
| Post subject: | Re: Carlos 2939 |
Lexus is200 front disk fitted, together with polybushed ARB link and Bilsteins [url]http://s1267.photobucket.com/user/toyokid/media/IMG_0852.jpg.html?filters[user]=129198947&filters[recent]=1&sort=1&o=5[/url] |
|
| Author: | toyokid [ Mon Aug 05, 2013 6:58 am ] |
| Post subject: | Re: Carlos 2939 |
Head re-built with Ferrea 1.0mm Oversive valves and new valve springs together with standard 205 cams [url]http://s1267.photobucket.com/user/toyokid/media/IMG_1155-1.jpg.html?filters[user]=129198947&filters[recent]=1&sort=1&o=0[/url] |
|
| Author: | toyokid [ Mon Aug 05, 2013 7:01 am ] |
| Post subject: | Re: Carlos 2939 |
Mitsubishi Evo blow off valve [url]http://s1267.photobucket.com/user/toyokid/media/IMG_1278.jpg.html?filters[user]=129198947&filters[recent]=1&sort=1&o=0[/url] |
|
| Page 1 of 2 | All times are UTC + 1 hour |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|