www.gt4dc.co.uk http://www.gt4dc.co.uk/forum/ |
|
Injectors http://www.gt4dc.co.uk/forum/viewtopic.php?f=1&t=6858 |
Page 1 of 1 |
Author: | Insanity-74 [ Fri Dec 06, 2013 9:35 pm ] |
Post subject: | Injectors |
Just been investigating top feed injectors, currently it's a choice of two, either Siemens Deka top feed injectors or Delphi injectors in either a wolfkats fuel rail or a custom jobbie, there seems to be little price difference......any opinions on the above? |
Author: | Insanity-74 [ Fri Dec 06, 2013 10:08 pm ] |
Post subject: | Re: Injectors |
Also looking at injector dynamics injectors, but unsure about their all plastic construction.? |
Author: | TrackToyFour [ Fri Dec 06, 2013 11:16 pm ] |
Post subject: | Re: Injectors |
Can't comment on those as have no experience of them. I'm using RC injectors as supplied by Engine Logics who have built many high power MR2 3S-GTE's in Texas. |
Author: | Diceman [ Fri Dec 06, 2013 11:41 pm ] |
Post subject: | Re: Injectors |
I believe that there are very few original injector manufacturers. Many are rebranded for purpose. Denso, Siemens (Bosch?????) and Delphi I believe are original manufacturers . Rc rebadge what suits and I believe my 750cc are rebadged denso from an rx7. |
Author: | Insanity-74 [ Sat Dec 07, 2013 12:15 am ] |
Post subject: | Re: Injectors |
These are the RC injectors I can find after an admittedly brief search http://www.rceng.com/Peak-Hold-Injector ... P51C5.aspx They get good reports but not sure if I would buy them or not if they are just rebadged from whatever they can source. |
Author: | TrackToyFour [ Sat Dec 07, 2013 12:21 am ] |
Post subject: | Re: Injectors |
I am 99.99% sure that RC make their own injectors. This was one of the main reasons I bought them as very few people made 1000cc injectors at the time I built my engine |
Author: | yellowchinaman [ Sun Dec 22, 2013 6:18 pm ] |
Post subject: | Re: Injectors |
Why not just get drop in Denso 800c? |
Author: | dale [ Sun Dec 22, 2013 9:32 pm ] |
Post subject: | Re: Injectors |
we used wolkatz 870cc from tim on my brothers and they are very good from what we have experienced |
Author: | Muddy Water [ Tue Dec 31, 2013 1:21 pm ] |
Post subject: | Re: Injectors |
I'll be running the Wolfkatz setup with the Delphi Racing (Rochester) 84lb/hr (880cc/min), Top feed, Low impedance, Injectors |
Page 1 of 1 | All times are UTC + 1 hour |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |