www.gt4dc.co.uk
Maintain, Modify and DRIVE your GT-Four


It is currently Thu Mar 28, 2024 7:42 pm




Post new topic Reply to topic  [ 541 posts ]  Go to page 1, 2, 3, 4, 5 ... 37  Next
Author Message
 Post subject: Project Taurus
PostPosted: Sat Apr 18, 2009 12:11 pm 
Offline
WRC
User avatar

Joined: Tue Dec 09, 2008 6:51 pm
Posts: 1397
Location: Austria
Car Model: None
Hi,

yesterday i started the first work

PART ONE: realization of a tip from a friend from TTE

step1: matrial procure

2x 10cm long 30mm samco hose, machine two connector's so that the hose can't slip of the pipe, 60cm long 32mm stainless pipe (dont' know how much inch it is), 2 stainless elbows
-> WIG welding

step2: pipe costomize and welding

only one pic in finished condition becouse i want to safe time

[img][img]http://img219.imageshack.us/img219/8483/khlung3.jpg[/img][/IMG]

be sure that you have enought space to the pipe all around, and no it's not only a pipe and 2 elbows there are 4 angle's

step3: mounting

[img][img]http://img219.imageshack.us/img219/5706/khlung2.jpg[/img][/IMG]

[img][img]http://img219.imageshack.us/img219/1762/khlung4.jpg[/img][/IMG]

[img][img]http://img219.imageshack.us/img219/5342/khlung1.jpg[/img][/IMG]

i take 1,5cm space between radiator and pipe and also 1,5cm between engine and pipe to compensate engine motion

don't think that this is a 30min action, it is much work to make the pipe fit perfect and as i have no routine in this....it is around 5hours, 5 canny hours with smoke break :D

to be contiued.....

greetz

_________________
KEEP COOL UNDER PRESSURE
Image
street legal?.....perhaps in tschibuti


Top
 Profile  
 
 Post subject:
PostPosted: Sat Apr 25, 2009 11:12 pm 
Offline
WRC
User avatar

Joined: Tue Dec 09, 2008 6:51 pm
Posts: 1397
Location: Austria
Car Model: None
Hi,

today it goes on, but first my impression about the stainless pipe, i never saw the themp. needle falling down so fast even on midday (in the half of it's normal position if the engine is warm), until this mod the needle falls donw only when it was cold, early in the morning or at night in spring or fall, and now the work of today

PART TWO:

C-One Stabilizer:

i'am up to 50% a lucki guy, the front stabilizer link was to open, but the rear links not, a angle grinder got the problem solved

[img][img]http://img26.imageshack.us/img26/6623/stabilizerf.jpg[/img][/IMG]

[img][img]http://img26.imageshack.us/img26/1710/stabilizerr.jpg[/img][/IMG]

these stabilizer make the car stable in a curve when you change of load, it feels pretty better then with OEM where the car's rear bounce

J Speed Braided Clutch Line

what a horrible work, but it is not impossible it is fine when you have a friend by your side with small hand :)

[img][img]http://img26.imageshack.us/img26/2668/clutchline.jpg[/img][/IMG]

safe your time money and especially neves, there is no feelable difference to the OEM line

comming soon:
TTE Group A Swirlpot (Intercooler)
Jabsco Pump (Intercooler)

to be continued.....

greetz

_________________
KEEP COOL UNDER PRESSURE
Image
street legal?.....perhaps in tschibuti


Top
 Profile  
 
 Post subject:
PostPosted: Mon Apr 27, 2009 11:56 am 
Offline
Club Staff
User avatar

Joined: Thu Jul 14, 2005 3:07 pm
Posts: 988
Location: Fareham
Car Model: ST205
Sunny,

This is great :D

Looking forward to seeing the swirlpot mod, I know there has been a lot of discussion around this over the years ;)

_________________
Loosey
Loosey@gt4dc.co.uk
Storm Blue JDM ST205
Super White JDM ST205
http://www.gtfours.co.uk

Some people are like a Slinky .. Not really good for anything, but they make you smile when you shove them down the stairs!


Top
 Profile  
 
 Post subject:
PostPosted: Mon Apr 27, 2009 2:49 pm 
Offline
Club Staff
User avatar

Joined: Wed Jul 13, 2005 12:06 am
Posts: 4743
Location: Perth, Western Australia
Car Model: ST205
I presume that TTE found it necessary to fit a swirl pot to the Water-To-Air (WTA) charge cooler because the coolant was close to boiling or aereating in some way? Perhaps this is why they went for a Front-Mount-Intercooler (FMIC) on the Corolla WRC?

Alex, regarding the engine coolant, are you planning on fitting a swirl pot for that as well? The TTE setup seemed to rely on a stainless steel braided 'bleed' line from the high point of the curved hose which takes the hot coolant from the end of the cylinder head to the sealed radiator top tank. This bleed line was routed to the engine coolant header tank on the wing. I'm not sure how effective this was, it was certainly different to a conventional swirl pot.

_________________
Don
GT4DC Chairman
1994 Toyota Celica GT-Four ST205WRC JDM 269bhp @ 0.9bar
1994 Toyota Celica GT-Four Special GT 590bhp @ 1.8bar
1989 Van Diemen RF88/89 Formula Ford 1600
2008 Nissan Patrol GU 3.0L ZD30DDTi 154bhp


Top
 Profile  
 
 Post subject:
PostPosted: Mon Apr 27, 2009 3:53 pm 
Offline
WRC
User avatar

Joined: Tue Dec 09, 2008 6:51 pm
Posts: 1397
Location: Austria
Car Model: None
Hi,

Loosey, you become pictures in mai, becouse i'am waiting for some parts :)
and another discussion ist started yet :lol:

TTF, i think there are two resons for the swirlpot

- cavitation (becouse of a more powerfull pump)
- it is the highest position, means you can fill the intercooler to his maximum level without any air

if you have problems with the themp you can go for a bigger radiator or you can change the radiator cap against a more powerfull item, i can't see it clear on the picture you sent to me, but i think it speaks 3,8bar, means a boiling point of 140°C - 145°C i don't know it exacely any more

going for a FMIC......my theory is:

WTA is better for spool-up, and a little bit worse in efficiency
FMIC is a bit better in efficiency but worse for the spool up

they use FAS (fresh air system) or anti-lag, means no spool up problem in the corolla so they go for lighter and less complex system (only one radiator, no pump, wiring), and the ST205 still have a WTA becouse is was rally proved and the anti lag was a "new kid on the block" :)

going for a swirlpot for the engine water is a option too, but i think that i'am not so often on a race-way where cooling becomes really important especially when you drive long, so i'am not sure, but a system like TTE use should possible with a MR2 thermostat-housing and water/air lines on position's where air can flow up easy (the reason why TTE build it in the curved alu-pipe you talk about), but even in the best engine cooling system you will find 200-300cm³ of air
possible that i will build this system when i have to much time, but not sure :)

why is the TTE system different to others?

greetz

_________________
KEEP COOL UNDER PRESSURE
Image
street legal?.....perhaps in tschibuti


Top
 Profile  
 
 Post subject:
PostPosted: Mon Apr 27, 2009 6:24 pm 
Offline
Club Staff
User avatar

Joined: Thu Jul 14, 2005 12:44 pm
Posts: 4067
Location: drinking devil fuel
Car Model: ST205
Hi Sunny,

Is the front stabilizer uprated or just shiney :D


Top
 Profile  
 
 Post subject:
PostPosted: Mon Apr 27, 2009 7:51 pm 
Offline
WRC
User avatar

Joined: Tue Dec 09, 2008 6:51 pm
Posts: 1397
Location: Austria
Car Model: None
Hi,

205, it is a uprated c-one type :lol:

greetz

_________________
KEEP COOL UNDER PRESSURE
Image
street legal?.....perhaps in tschibuti


Top
 Profile  
 
 Post subject:
PostPosted: Mon Apr 27, 2009 8:00 pm 
Offline
Junior WRC

Joined: Tue May 23, 2006 8:06 pm
Posts: 595
Location: Knoxville, TN USA
Car Model: None
What the diameter of the new front strut bar? Have you already upgraded the rear or are you staying stock?

_________________
Coldiron (Cold - Iron)
1992 Celica Gt4 RC Conv. St205 swap
Image
http://www.noritoy.com


Top
 Profile  
 
 Post subject:
PostPosted: Mon Apr 27, 2009 8:23 pm 
Offline
WRC
User avatar

Joined: Tue Dec 09, 2008 6:51 pm
Posts: 1397
Location: Austria
Car Model: None
Hi,

cms, front and also rear is from C-ONE :)

front: OEM=15mm C-One=18mm
rear: OEM=17mm C-One=19mm

http://www.c-one.co.jp/C-ONEPARTS/stabilizer.html

greetz

_________________
KEEP COOL UNDER PRESSURE
Image
street legal?.....perhaps in tschibuti


Top
 Profile  
 
 Post subject:
PostPosted: Mon Apr 27, 2009 9:53 pm 
Offline
Club Staff
User avatar

Joined: Mon Mar 26, 2007 5:53 pm
Posts: 1736
Location: Another Shire County
Car Model: ST185
Interesting read 8) ...good work.

C-ONE ARBs rock :D

_________________
Vice Chairman
1990 White UK Celica ST185 - Project DTM
1997 Cream BMW R1200C (as seen in James Bond "Tomorrow Never Dies")
2005 Jaguar X-type 3.0 Sovereign AWD Automatic
Blood Bikes - https://www.freewheelers.org.uk/


Top
 Profile  
 
 Post subject:
PostPosted: Wed Apr 29, 2009 4:03 pm 
Offline
WRC
User avatar

Joined: Tue Dec 09, 2008 6:51 pm
Posts: 1397
Location: Austria
Car Model: None
Hi,

Muddy Water, thanks :)

now the 54-killer is done, i use the pink cable to control the new relays

[img][img]http://img134.imageshack.us/img134/2279/pumpe3x.jpg[/img][/IMG]

and the relay, 12V 30A

[img][img]http://img134.imageshack.us/img134/5863/pumpe2.jpg[/img][/IMG]

greetz

_________________
KEEP COOL UNDER PRESSURE
Image
street legal?.....perhaps in tschibuti


Top
 Profile  
 
 Post subject:
PostPosted: Wed May 06, 2009 8:09 pm 
Offline
WRC
User avatar

Joined: Tue Dec 09, 2008 6:51 pm
Posts: 1397
Location: Austria
Car Model: None
Hi,

some different parts

[img][img]http://img4.imageshack.us/img4/2695/diverseteileh.jpg[/img][/IMG]

greetz

_________________
KEEP COOL UNDER PRESSURE
Image
street legal?.....perhaps in tschibuti


Top
 Profile  
 
 Post subject:
PostPosted: Sun May 10, 2009 9:37 am 
Offline
WRC
User avatar

Joined: Tue Dec 09, 2008 6:51 pm
Posts: 1397
Location: Austria
Car Model: None
Hi,

i was asked to write a feedback to the stainless pipe, and here we go

spec's of the engine coolant system
- TRD thermosthat
- 40mm radiator

former (befor the pipe) as i drive the car in spring or fall when it is cold in the morning and at night, after 2x or 3x WOT, the needle falls down in it's half positon and lower, means that the radiator cools down faster then the thermosthat can regulate
and now i have this every time
(i should look at the AFR, about the ecu think it is a cold start :lol: :lol: )
now i can say that my engine becomes much water especially when i drive the car hard in high rpm's, this also means that the turbo and OEM oil/water exchanger becomes more water when they must work hard, my highest oil themp. since i mounted the pipe was 103°C (former it could reach 120°C and sometime +), and yesterday i drove the car 30minutes very hard and it is bretty hot outside, i think there is much much much work to do to hit 120°C again :D

i advise you'll this mod :)

great thanks to a friend from TTE for his ideas and suggestions 8)
i'll try to realize them as good as i can :)

greetz

_________________
KEEP COOL UNDER PRESSURE
Image
street legal?.....perhaps in tschibuti


Top
 Profile  
 
 Post subject:
PostPosted: Sun May 10, 2009 10:48 am 
Offline
Club Staff
User avatar

Joined: Wed Jul 13, 2005 12:06 am
Posts: 4743
Location: Perth, Western Australia
Car Model: ST205
Can anyone explain to me why replacement of the OEM blasck radiator hose by a 32mm diameter stainless steel pipe results in a drop in oil temperature from ~120deg C to ~103deg C? I an confused :?

On the TTE cars they replaced the oil/water heat exchanger doughnut with a stand-alone air cooled oil/water heat exchanger.

On track days and even the short runs in the Toyota Sprint Series the shortcomings in standard oil/water doughnut mean that most cars boil their coolant. Sirius fitted an engine oil cooler to his ST205 some time ago but I'm not sure what effect this has had on both oil and water temps under track conditions?

_________________
Don
GT4DC Chairman
1994 Toyota Celica GT-Four ST205WRC JDM 269bhp @ 0.9bar
1994 Toyota Celica GT-Four Special GT 590bhp @ 1.8bar
1989 Van Diemen RF88/89 Formula Ford 1600
2008 Nissan Patrol GU 3.0L ZD30DDTi 154bhp


Top
 Profile  
 
 Post subject:
PostPosted: Sun May 10, 2009 11:17 am 
Offline
Club Staff
User avatar

Joined: Thu Jul 14, 2005 12:44 pm
Posts: 4067
Location: drinking devil fuel
Car Model: ST205
Not convincingly no :(

I can only think of two reasons, neither of which would, to me at least, seem to explain it

1) The metal pipe will loose a lot more heat than the rubber version. However, compared to the radiator I'd think this would be minimal in the big picture

2) The new pipe flows differently and causes more water flow through the doghnut cooler

I guess 2) is the significant factor but you'd think a metal pipe would flow better if the rubber and metal are the same size.
All I can imagine is that the rubber allows more flow due to pipe expansion when under pressure.
Restricting this flow would mean more water tried to take the bypass route which is via the oil cooler setup

I do have one other idea that I'll throw out there too

The water coming back from the rad is that much cooler - As Sunny says, lower than required. So the t/stat closes a little bit to regulate engine temp. This should force a little more round the oilcooler as the return for the cooler is post t/stat

Maybe a combination of all of that. Or perhaps I'm barking up the wrong tree entirely


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 541 posts ]  Go to page 1, 2, 3, 4, 5 ... 37  Next


Who is online

Users browsing this forum: No registered users and 22 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group