| www.gt4dc.co.uk http://www.gt4dc.co.uk/forum/ |
|
| Rebuild SSS (Super Strat Suspension) http://www.gt4dc.co.uk/forum/viewtopic.php?f=1&t=7688 |
Page 1 of 6 |
| Author: | бешаный 202 [ Fri Dec 16, 2016 9:48 am ] |
| Post subject: | Rebuild SSS (Super Strat Suspension) |
I brought to you how I solved the problem with a thud on the suspension arms SSS. I really like to use it SSS suspension arms, because I had the opportunity to compare with McPherson suspension, because like last machine was ST-202. But after the purchase, I discovered a terrible knock on all the front suspension, which has been difficult to locate. I started to deal with this problem. 
|
|
| Author: | бешаный 202 [ Fri Dec 16, 2016 10:35 am ] |
| Post subject: | Re: Rebuild SSS (Super Strat Suspension) |
The photo shows the condition of joints and bushings fingers under which they operate. https://drive.google.com/drive/folders/ ... zloQURlVTg |
|
| Author: | бешаный 202 [ Fri Dec 16, 2016 10:53 am ] |
| Post subject: | Re: Rebuild SSS (Super Strat Suspension) |
More photos bushings who worked in arms: https://drive.google.com/drive/folders/ ... 3prdGt6NzQ |
|
| Author: | бешаный 202 [ Fri Dec 16, 2016 11:08 am ] |
| Post subject: | Re: Rebuild SSS (Super Strat Suspension) |
We handle fingers leverage hinges. Grinding, but not too much because there is a certain depth of hardening. Finger in soft and hard top. https://drive.google.com/drive/folders/ ... zZsRFFRT1k |
|
| Author: | бешаный 202 [ Fri Dec 16, 2016 12:22 pm ] |
| Post subject: | Re: Rebuild SSS (Super Strat Suspension) |
Links work? |
|
| Author: | dt4 [ Fri Dec 16, 2016 7:52 pm ] |
| Post subject: | Re: Rebuild SSS (Super Strat Suspension) |
Looks like good work, have you re assembled them? What was the result? |
|
| Author: | бешаный 202 [ Sat Dec 17, 2016 6:39 am ] |
| Post subject: | Re: Rebuild SSS (Super Strat Suspension) |
Yes of course I brought back and 3 years they go.  Here are a few photos that would understand the process of revival of suspension arms: In the photo on the link seen all kinds of plugs, which are used within the arms. This new hub made using the machine with numerical control software. https://drive.google.com/drive/folders/ ... lRkTnlQVm8 |
|
| Author: | бешаный 202 [ Sat Dec 17, 2016 6:44 am ] |
| Post subject: | Re: Rebuild SSS (Super Strat Suspension) |
More photos: https://drive.google.com/drive/folders/ ... 21OazB0VjQ |
|
| Author: | бешаный 202 [ Sat Dec 17, 2016 6:50 am ] |
| Post subject: | Re: Rebuild SSS (Super Strat Suspension) |
General view of the SSS control arms before the assembly (couples details in the photo is not enough, but you can understand the scale). https://drive.google.com/drive/folders/ ... lVlM1NVcVk |
|
| Author: | бешаный 202 [ Sat Dec 17, 2016 7:33 am ] |
| Post subject: | Re: Rebuild SSS (Super Strat Suspension) |
Photos ready suspension arms SSS: Myself I levers did three years ago. In the photo one of many of my works. https://drive.google.com/drive/folders/ ... HMwM2hpMnM |
|
| Author: | бешаный 202 [ Sat Dec 17, 2016 7:41 am ] |
| Post subject: | Re: Rebuild SSS (Super Strat Suspension) |
Here's another example embodiment. There are replacement of bushings in the suspension arm banana (yellow polyurethane). https://drive.google.com/drive/folders/ ... 2ZYUm9YZm8 |
|
| Author: | Sirius [ Sat Dec 17, 2016 5:57 pm ] |
| Post subject: | Re: Rebuild SSS (Super Strat Suspension) |
This looks very interesting.
|
|
| Author: | бешаный 202 [ Sat Dec 17, 2016 6:52 pm ] |
| Post subject: | Re: Rebuild SSS (Super Strat Suspension) |
Sirius wrote: This looks very interesting. Oh sure. Most importantly, no longer need to buy new suspension arms. Just pull out the pin, unscrew the back cover and change the sleeve and on the back of new arms...
|
|
| Author: | Kris [ Sun Dec 18, 2016 12:02 pm ] |
| Post subject: | Re: Rebuild SSS (Super Strat Suspension) |
Great work! |
|
| Author: | бешаный 202 [ Mon Dec 19, 2016 6:04 am ] |
| Post subject: | Re: Rebuild SSS (Super Strat Suspension) |
Kris wrote: Great work! Thank you for your appreciation of my work. |
|
| Page 1 of 6 | All times are UTC + 1 hour |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|