| www.gt4dc.co.uk http://www.gt4dc.co.uk/forum/ |
|
| Front Mount Intercooler on ST185CS http://www.gt4dc.co.uk/forum/viewtopic.php?f=1&t=984 |
Page 1 of 1 |
| Author: | sikx5 [ Sun May 28, 2006 7:25 am ] |
| Post subject: | Front Mount Intercooler on ST185CS |
G'day fellas, Im going down the front mount road with the GT4 and i was wondering if your code 54 write up applies for the ST185CS as well? Im planning on running a cooler from an evo 7. Will post up pics and progress as usual. I wanted to keep the WTA, but after some of the mods ive done, i will be able to gain more from a front mount. Cheers Shane |
|
| Author: | Kris [ Sun May 28, 2006 10:07 am ] |
| Post subject: | |
Quote: i was wondering if your code 54 write up applies for the ST185CS as well
No. The setup on the 205 is different to the 185. It should be much easier to fool the ECU on the 185. Initial things I would look at: 1. Bridge the IC level sensor 2. Possibly just remove the pump, if this flags up an error at the ECU then I would think that a resistor is all that is required in place of the pump. Will be interested to hear how you get on 
|
|
| Author: | andycaca [ Sun May 28, 2006 10:59 am ] |
| Post subject: | |
when i fitted a fmic to my 165, all i had to do was remove the chargecooler pump and bridge the chargecooler level sensor with a piece of wire. |
|
| Author: | sikx5 [ Tue May 30, 2006 3:15 pm ] |
| Post subject: | |
Thanks for the heads up fellas. I will look into for sure. Im looking at running either a 450 x 300 x 76 - 2.5 Inch inlet/outlet core or a 600 x 300 x 76 - 2.5 Inch inlet/outlet. with 2.5" pipe work all around. What would you guys say is the best option, looking for least lag as possible. I was even thinking 2" from turbo to the intercooler, then 2.5" from intercooler to TB? Thanks Shane |
|
| Page 1 of 1 | All times are UTC + 1 hour |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|