www.gt4dc.co.uk
Maintain, Modify and DRIVE your GT-Four


It is currently Wed Oct 18, 2017 4:35 am




Post new topic Reply to topic  [ 11 posts ] 
Author Message
PostPosted: Sat Aug 19, 2017 6:55 pm 
Offline
Clubman

Joined: Sun Oct 16, 2011 6:57 pm
Posts: 135
Car Model: None
Hi guys
Bit of an off question i have a hks f con and wiri g loom but it appears no one mapps them any more. I thought i may be able to convert it to work with an e manage. Ovcours using thier plugs and repinning it.
Is thid an idea or no good?


Top
 Profile  
 
PostPosted: Sun Aug 20, 2017 10:10 pm 
Offline
Clubman

Joined: Sun Oct 16, 2011 6:57 pm
Posts: 135
Car Model: None
Ill try this again.
Bit of an odd question i have a hks f con and wiring loom but it appears no one mapps them any more. I thought i may be able convert it to work with an e manage. Of course using thier plugs and repinning it.
Is this an idea or no good?


Top
 Profile  
 
PostPosted: Mon Aug 21, 2017 9:29 pm 
Offline
Group B
User avatar

Joined: Sat Sep 02, 2006 3:13 pm
Posts: 3580
Location: Bournemouth
Car Model: None
I have no experience with any of these products.

_________________
If at first you don't suck seed, try drier grain.

Image


Top
 Profile  
 
PostPosted: Mon Aug 21, 2017 10:29 pm 
Offline
Club Staff
User avatar

Joined: Wed Jul 13, 2005 12:14 am
Posts: 3218
Location: Camberley, Surrey
Car Model: ST205
I would imagine it would be more trouble than it was worth. These units still have some value - sell it and put the money towards a more supported system like Link or MoTec et al.

_________________
GT4DC Events Co-ordinator
1996 ST205 UK


Top
 Profile  
 
PostPosted: Tue Aug 22, 2017 1:05 pm 
Offline
Clubman

Joined: Sun Oct 16, 2011 6:57 pm
Posts: 135
Car Model: None
I have tried selling it but no interest unfortunately.
I can get an e manage ultimate for a couple of hundred pounds and they are good.
I was just a thought as it would save money on a custom loom again.


Top
 Profile  
 
PostPosted: Tue Aug 22, 2017 2:30 pm 
Offline
Club Staff
User avatar

Joined: Wed Jul 13, 2005 5:10 pm
Posts: 1952
Location: Sunny Fareham, UK
Car Model: ST205
I'd suggest going for a more modern/popular ECU - think you'll struggle to find anyone who has the knowledge/software/cables for the F-Con...

_________________
Kris
95 ST205 - slept for 10 years, now waking up...
Avensis
http://www.gtfours.co.uk
_______________________________________
Turbocharging - the replacement for displacement


Top
 Profile  
 
PostPosted: Sun Aug 27, 2017 9:15 am 
Offline
Junior WRC

Joined: Fri Mar 27, 2009 9:39 pm
Posts: 787
Car Model: None
I use this company to map my HKS ecu

https://protuner.co.uk/

_________________
BRD Page

http://www.brooks-brd.co.uk/

https://www.facebook.com/Brooks.Racing.Dev


Top
 Profile  
 
PostPosted: Sun Aug 27, 2017 9:16 am 
Offline
Junior WRC

Joined: Fri Mar 27, 2009 9:39 pm
Posts: 787
Car Model: None
there all so on facebook

https://www.facebook.com/ProtunerUK/

_________________
BRD Page

http://www.brooks-brd.co.uk/

https://www.facebook.com/Brooks.Racing.Dev


Top
 Profile  
 
PostPosted: Mon Sep 04, 2017 7:21 pm 
Offline
Club Staff
User avatar

Joined: Mon Mar 26, 2007 5:53 pm
Posts: 1714
Location: Another Shire County
Car Model: ST185
FYI Chris @PTS can install and set up most aftermarket engine management systems and piggyback controllers such as GReddys excellent E-manage and E-manage Ultimate and Apexi's Power FC, Super AFC and Super ITC units. http://www.performancetuningservices.co.uk/tuning.html
May be worth pinging him an email :wink:

_________________
Vice Chairman
1990 White UK Celica ST185 - Project DTM
2015 White Jaguar XF Sportbrake R-Sport Black Edition
2006 Graphite BMW K1200GT SE
1997 Cream BMW R1200C (as seen in James Bond "Tomorrow Never Dies")


Top
 Profile  
 
PostPosted: Mon Sep 04, 2017 7:53 pm 
Offline
Junior WRC

Joined: Fri Mar 27, 2009 9:39 pm
Posts: 787
Car Model: None
the problem with HKS if you need to have the HKS key and HKS software to map it. and you need to be a HKS dealer for them to let you have it.

_________________
BRD Page

http://www.brooks-brd.co.uk/

https://www.facebook.com/Brooks.Racing.Dev


Top
 Profile  
 
PostPosted: Mon Sep 18, 2017 10:16 am 
Offline
Clubman

Joined: Sun Oct 16, 2011 6:57 pm
Posts: 135
Car Model: None
Well I think i have found a guy in the north east who can map them. I need my car run in before I get that far.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 11 posts ] 


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Group