www.gt4dc.co.uk
http://www.gt4dc.co.uk/forum/

Projectors this Friday!!!!
http://www.gt4dc.co.uk/forum/viewtopic.php?f=13&t=279		 Page 1 of 2
Author:  krude [ Wed Nov 16, 2005 3:17 pm ]
Post subject:  Projectors this Friday!!!!
Ok just getting round to the projectors, better late then never I say.
Anyone know how the front bumper comes off?? :roll: :roll:
Author:  krude [ Wed Nov 16, 2005 3:32 pm ]
Post subject: 
:oops: :oops: Ok forget this post, should have looked before I leaped, I've found out how to do it now :roll: :roll:

3 bolts in the front wing each side, clips by number plate, bolts along the top & remove the trays.
Author:  Kris [ Wed Nov 16, 2005 5:47 pm ]
Post subject: 
Whereabouts the the clips for the side of the bumper/nose cone, I have heard they are difficult/awkward to get at?
Author:  two_OH_five [ Wed Nov 16, 2005 7:21 pm ]
Post subject: 
BO-02 of RM399E Kris
Author:  krude [ Thu Nov 17, 2005 8:46 am ]
Post subject: 
Take the number plate off & look under the mounting bracket facia plastic thing.
2 clips to the left, 2 where the number plate is & 2 to the right.
Well I think it is them anyway & if it is they look a pitta to get out. :roll: :roll:

Will be able to tell you tomorrow... I hope :roll: :roll:

Do you want me to make a how to guide while I'm at it??


Quote:
BO-02 of RM399E Kris


Steve...

You need to get out more :P :P :lol: :lol: :lol: :lol: :lol: :lol:
Author:  Loosey [ Thu Nov 17, 2005 11:05 pm ]
Post subject: 
Quote:
Do you want me to make a how to guide while I'm at it??


Daz, yes please :)

I am sure I am not the only one who finds these things useful.
Author:  Sirius [ Fri Nov 18, 2005 1:14 am ]
Post subject: 
I think a writeup for removing the nosecone is an excellent idea :)
Author:  krude [ Wed Nov 23, 2005 11:21 am ]
Post subject: 
Oh what a mare of a job :( :(
2 hours just to get the nose cone off!! :shock: :shock: , then I had to do a re-wire of the whole outer units :roll: :roll:

Have pics & will be making a guide, is there a format you would like it in or just give it to you to polish off??

I have to say they look the business on the car & there is a 100% improvement on the spread & distance of the beam :D :D
Author:  two_OH_five [ Wed Nov 23, 2005 12:04 pm ]
Post subject: 
Good stuff Dude

Any old format should do. Text is easy to reformat but Doc/rtf is fine too

We're experienced "polishers" here ROFL
Author:  Diceman [ Wed Nov 23, 2005 1:57 pm ]
Post subject: 
Piccies are always a good format :-)
Author:  krude [ Wed Nov 23, 2005 4:24 pm ]
Post subject: 
yeah got loads of pic's :wink: :wink:
I will write it up over the weekend.
Author:  Sirius [ Wed Nov 23, 2005 5:58 pm ]
Post subject: 
Thanks Darren :)

Any format is fine - images as JPG's please though. :)
Author:  krude [ Tue Nov 29, 2005 5:34 pm ]
Post subject: 
Just went through my bits last night & found I have a guide for fitting Clear front indicators & fitting an EBC (inc VSV disable mod) if you want them too??
Author:  TrackToyFour [ Tue Nov 29, 2005 6:03 pm ]
Post subject: 
Daz, I think the more material the better! If you send it over to Mike we can review and tart up as appropriate :D

Cheers,
Author:  Sirius [ Tue Nov 29, 2005 9:08 pm ]
Post subject: 
Darren - any material you have will be greatly appreciated :)
Page 1 of 2 All times are UTC + 1 hour
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/