www.gt4dc.co.uk
Maintain, Modify and DRIVE your GT-Four


It is currently Fri Apr 19, 2024 8:14 pm




Post new topic Reply to topic  [ 8 posts ] 
Author Message
PostPosted: Tue Dec 06, 2005 10:20 pm 
Offline
Junior WRC

Joined: Thu Nov 17, 2005 4:56 pm
Posts: 794
Car Model: None
I have a '92 UK CS.
I am going to buy a dizzy cap and arm but there appear to be two types of cap.....one for 5mm leads and one for 8mm leads......early spec had 8mm leads according to the Fensport website....and of course 5mm for the late spec....
Which is mine.......or do I just take my VIN number into Mr. T and get them to check on their system?

Cheers

Steve


Top
 Profile  
 
 Post subject:
PostPosted: Tue Dec 06, 2005 10:54 pm 
Offline
Club Staff
User avatar

Joined: Wed Jul 13, 2005 5:10 pm
Posts: 1953
Location: Sunny Fareham, UK
Car Model: ST205
Steve - maybe the easiest way is to have a look at the leads you currently have and see if they measure 5mm or 8mm?

_________________
Kris
95 ST205 - slept for 10 years, now waking up...
Avensis
http://www.gtfours.co.uk
_______________________________________
Turbocharging - the replacement for displacement


Top
 Profile  
 
 Post subject:
PostPosted: Tue Dec 06, 2005 10:58 pm 
Offline
Group N

Joined: Fri Oct 07, 2005 10:15 am
Posts: 182
Location: southampton
Car Model: None
from what i have read in the past.the cs is the late spec 5mm


Top
 Profile  
 
 Post subject:
PostPosted: Tue Dec 06, 2005 11:02 pm 
Offline
Junior WRC

Joined: Thu Nov 17, 2005 4:56 pm
Posts: 794
Car Model: None
Kris wrote:
Steve - maybe the easiest way is to have a look at the leads you currently have and see if they measure 5mm or 8mm?


:oops: I know.....was just being lazy with the car in the garage......I was going to email my order to fensport.....I will check......I want to stick with brand new stock leads......anyone know how much they cost in comparisson to Magnecor leads?

Steve


Top
 Profile  
 
 Post subject:
PostPosted: Tue Dec 06, 2005 11:08 pm 
Offline
Group N
User avatar

Joined: Sat Nov 12, 2005 9:32 pm
Posts: 238
Location: Under the Bonnet.
Car Model: None
well if it has 5mm leads they are generally more expensive.

i had a corolla gti with 5mm leads and they were over 50 quid non genuine.

8mm is a standard size through out all manufactures hench cheeper

_________________
1990 JDM ST185 Grey.
ST205 head gasket.
ARP head bolts.
ST205 Koyo Rad. (almost)
Front mount intercooler.
Colder plugs.
3" decat pipe.
4 Branch manifold.
Nitrous Oxide Steroids for Cars!


Top
 Profile  
 
 Post subject:
PostPosted: Tue Dec 06, 2005 11:16 pm 
Offline
Junior WRC

Joined: Thu Nov 17, 2005 4:56 pm
Posts: 794
Car Model: None
Well in that case then I'll get a quote from Mr. T....see if they are more or less than a set of 5mm Magnecor leads. I'll go for the cheaper.....not fussed which it is....


Top
 Profile  
 
 Post subject:
PostPosted: Tue Dec 06, 2005 11:38 pm 
Offline
Group N

Joined: Fri Oct 07, 2005 10:15 am
Posts: 182
Location: southampton
Car Model: None
i also heard it's best to stick with stock as the maggys are not too good,but that is what i heard


Top
 Profile  
 
 Post subject:
PostPosted: Wed Dec 07, 2005 11:14 pm 
Offline
Junior WRC

Joined: Thu Nov 17, 2005 4:56 pm
Posts: 794
Car Model: None
people on IMOC also agree that stock leads are prolly the best to use....so stock it is.... :wink:

Steve


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 8 posts ] 


Who is online

Users browsing this forum: No registered users and 25 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Group