Hi folks,
like the topic, i started to search for a good clutch that will fit my application and i though you guys can help me
- ~500NM
- max. 8250rpm
- a organic material like carbon is favored
i'am glad for advises
greetz
| www.gt4dc.co.uk http://www.gt4dc.co.uk/forum/ |
|
| Help me to find the correct clutch http://www.gt4dc.co.uk/forum/viewtopic.php?f=13&t=5052 |
Page 1 of 1 |
| Author: | Sunny [ Wed Jul 13, 2011 1:39 pm ] |
| Post subject: | Help me to find the correct clutch |
Hi folks, like the topic, i started to search for a good clutch that will fit my application and i though you guys can help me
- ~500NM - max. 8250rpm - a organic material like carbon is favored i'am glad for advises
greetz |
|
| Author: | dale [ Wed Jul 13, 2011 3:06 pm ] |
| Post subject: | |
we used a spec stage 3+ with stage 5 disc in my brothers car. 10k miles, over 400bhp, no problems so far |
|
| Author: | Sunny [ Fri Jul 15, 2011 8:55 pm ] |
| Post subject: | |
Hi i think 400hp would be not enought or to near on the boarder, is should be a little bit oversized but not to much i'am now i contact with carbonetic, exedy is to expensive, is there anyone with a feedback for me? greetz |
|
| Author: | dale [ Fri Jul 15, 2011 9:25 pm ] |
| Post subject: | |
400? the plate is rated to 550lb/ft torque rating. 
|
|
| Author: | Sunny [ Sat Jul 16, 2011 12:26 pm ] |
| Post subject: | |
Hi, do you have a homepage from them for me? greetz |
|
| Author: | dale [ Sun Jul 17, 2011 12:21 am ] |
| Post subject: | |
the rating of the stage 5 is 570lb/ft. we used however the stage 3+ cover etc with a stage 5 disc. better than stock feel on the pedal but massive ability. http://www.specclutch.com/cars/Toyota/MR-2/1994/Single the turbo is at the bottom. but each to their own on clutches i afraid, we have good feedback and others dont like them, so i would look for what you think best. the specs need bedding in properly for a good 500-1000miles before any hard use which is a pain but then other than that its had some serious abuse and no complaints after 10k |
|
| Author: | Sunny [ Sun Jul 17, 2011 6:01 pm ] |
| Post subject: | |
Hi, i'am possible interested in the super or mini twin type, i contacted them thanks greetz |
|
| Author: | Dan [ Wed Aug 03, 2011 6:23 pm ] |
| Post subject: | |
Clutchmasters FX-600? Twin organic kevlar discs: 
|
|
| Author: | Sunny [ Wed Aug 03, 2011 6:39 pm ] |
| Post subject: | |
Hi, to late 
meanwhile i bought a ATS single carbon clutch
i found nearly all twin clutches handle so much NM -> 600PS and more my thinking was relatively simple, better a broken clutch as a broken gearbox (in hope that the gearbox can handle this  ) , after some mails i decided to go with the Spec2 design and a 1900kg plate which give me a absolute maximum of 600PS in form of a single clutch with less parts, wheight and complexity, the only one point she is rated with up to 20% more pedal force, we will see.....
greetz |
|
| Page 1 of 1 | All times are UTC + 1 hour |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|