Hi,
is anyone able to get me the tooth of a gen.4 water pump, unfortunetly i droped my old one faster in the basket as i thought about to measure it
greetz
| www.gt4dc.co.uk http://www.gt4dc.co.uk/forum/ |
|
| Gen.4 timing belt pulley help http://www.gt4dc.co.uk/forum/viewtopic.php?f=13&t=5272 |
Page 2 of 2 |
| Author: | Sunny [ Wed Dec 07, 2011 4:04 pm ] |
| Post subject: | |
Hi, is anyone able to get me the tooth of a gen.4 water pump, unfortunetly i droped my old one faster in the basket as i thought about to measure it
greetz |
|
| Author: | two_OH_five [ Wed Dec 07, 2011 6:05 pm ] |
| Post subject: | |
remind me at the weekend! |
|
| Author: | Sunny [ Wed Dec 07, 2011 6:34 pm ] |
| Post subject: | |
Hi, got it 
greetz |
|
| Author: | two_OH_five [ Sun Dec 11, 2011 8:52 pm ] |
| Post subject: | |
I count 22 teeth on my metal impellered ST215 version |
|
| Author: | Sunny [ Sun Dec 11, 2011 9:00 pm ] |
| Post subject: | |
Hi, thats some great news, i also count 22teeth on the gen.3 plasik impeller pump thanks a lot for you help 
i also have a plan for a uprated pump, a few years ago when i did the axial celarance reseachs i found that decking 2mm makes the alu-threads useless now i know that the ST215 housing has a little higher impeller seat, perfect, i machine the seat to get 0,5mm clearance instead of 2mm oem should give me a good uprated pump
greetz |
|
| Page 2 of 2 | All times are UTC + 1 hour |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|