Hi folks,
as in the topic, has anyone good ideas about to get the rust as good as possible out of the bare block?
i'am glad for any tips & tricks
greetz
| www.gt4dc.co.uk http://www.gt4dc.co.uk/forum/ |
|
| How the best to clean the block from rust http://www.gt4dc.co.uk/forum/viewtopic.php?f=13&t=5386 |
Page 1 of 1 |
| Author: | Sunny [ Wed Feb 01, 2012 7:42 pm ] |
| Post subject: | How the best to clean the block from rust |
Hi folks, as in the topic, has anyone good ideas about to get the rust as good as possible out of the bare block? i'am glad for any tips & tricks
greetz |
|
| Author: | MrDB [ Thu Feb 02, 2012 12:05 pm ] |
| Post subject: | |
http://www.instructables.com/id/Electro ... aka-Magic/ DIY at home
|
|
| Author: | Sirius [ Thu Feb 02, 2012 2:38 pm ] |
| Post subject: | |
I have experimented with this method and it is good however it does require a certain amount of 'line of sight' unless you can somehow suspend an electrode inside the block without touching anything it will struggle to be effective at cleaning the inside. |
|
| Author: | Sunny [ Sat Feb 04, 2012 5:44 pm ] |
| Post subject: | |
Hi, looks like a good way but to complex for the block like sirius said isn't there any resistor used to protect against short circuit? i could built a wood plate with a few electrodes that goes in the block cooling bores, i could give this method a try
greetz |
|
| Author: | Sunny [ Tue Feb 07, 2012 3:26 pm ] |
| Post subject: | |
Hi folks, i decided to to give a more easier method a try, so i bought some phosphor acid possible anyone who also used this merhod can give me advises? greetz |
|
| Author: | Sunny [ Sun Feb 12, 2012 1:28 pm ] |
| Post subject: | |
Hi, job done, works perfect i decided to use a 15% acid for ~6hours, here some pictures 
greetz |
|
| Page 1 of 1 | All times are UTC + 1 hour |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|