www.gt4dc.co.uk http://www.gt4dc.co.uk/forum/ |
|
st202 TRD front strut brace http://www.gt4dc.co.uk/forum/viewtopic.php?f=13&t=6014 |
Page 1 of 1 |
Author: | Animal66 [ Tue Oct 16, 2012 4:30 am ] |
Post subject: | st202 TRD front strut brace |
Hello there, Can someone confirm if the "202" TRD 3point strut brace fits the 205? part number is 53607-ST001. From pics it looks like if you have ditched the charge cooler it should be ok. However I came across an old post from 2004 saying it had tobe chopped up to fit, can't work out why lol. Cheers |
Author: | Sirius [ Tue Oct 16, 2012 8:54 am ] |
Post subject: | |
I have some vague recollection about some braces not fitting due to the throttle body being in the way. Don't know if that applies to the TRD one you mention. |
Author: | Animal66 [ Tue Oct 16, 2012 9:35 am ] |
Post subject: | |
http://www.google.co.uk/imgres?q=53607- ... =141&ty=51 |
Author: | Nibbles [ Tue Oct 16, 2012 11:00 am ] |
Post subject: | |
Might fit if you go for a side feed manifold, otherwise the FMIC pipework will foul - assuming it misses the throttle body that is. The normal 'bent' versions used on the 4 are a waste of time, more flex than a rubber band. IMO the standard one cross-bracing to the bulkhead is about as good as it gets. |
Author: | Animal66 [ Tue Oct 16, 2012 1:23 pm ] |
Post subject: | |
Ah ok thanks, was a nice idea. |
Author: | Ferdyg [ Wed Oct 17, 2012 3:07 pm ] |
Post subject: | |
yeah but they look nice!! |
Author: | johnyboy1976 [ Sun Oct 28, 2012 8:50 pm ] |
Post subject: | |
One on this car |
Author: | Muddy Water [ Sun Oct 28, 2012 8:53 pm ] |
Post subject: | |
Answer to original question is NO it wont fit. Mainly because the charge cooler is in the way on the ST205. Pic above may be of 202 trd brace on a 205 but note there is no charge cooler - its been converted to a front mount. |
Author: | Animal66 [ Mon Oct 29, 2012 9:04 am ] |
Post subject: | |
Thanks for the pic Johny, from the other pictures I saw on 202's it looked like it would foul on the throttle body. I'm on fmic so happy days. |
Author: | jgtcracer [ Tue Oct 30, 2012 5:31 pm ] |
Post subject: | |
thats a lovely looking engine bay!, look at them hard pipes! |
Page 1 of 1 | All times are UTC + 1 hour |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |