www.gt4dc.co.uk http://www.gt4dc.co.uk/forum/ |
|
Crank Pulley Question http://www.gt4dc.co.uk/forum/viewtopic.php?f=13&t=6576 |
Page 2 of 2 |
Author: | Muddy Water [ Tue Jun 11, 2013 8:07 pm ] |
Post subject: | Re: Crank Pulley Question |
Well my engine was balanced with the following:
|
Author: | YerRandO [ Sun Jun 16, 2013 2:50 am ] |
Post subject: | Re: Crank Pulley Question |
The same company makes a ST185 specific balancer as well : http://www.garage7.com.au/home/index.php?page=shop.product_details&flypage=flypage.tpl&product_id=2885&category_id=596&option=com_virtuemart&Itemid=53 Originally they put out the MR2 balancer claiming it fit the ST185 as well (they are clearly different designs and not interchangeable) I traded a few emails with them regarding the fitment and differences but never heard any more than "we can make you a custom one for $$$", I see now they have a separate part number for the ST185 (804200-1 vs 804200 for the MR2) Here is the original post regarding the dampener fitting both: http://blog.rossperformanceparts.com/toyota-damper-suits-2nd-generation-3sgte-sw20-st185-and-a-3sge/ |
Author: | Muddy Water [ Tue Jul 30, 2013 8:50 pm ] |
Post subject: | Re: Crank Pulley Question |
YerRandO wrote: The same company makes a ST185 specific balancer as well : http://www.garage7.com.au/home/index.php?page=shop.product_details&flypage=flypage.tpl&product_id=2885&category_id=596&option=com_virtuemart&Itemid=53 Originally they put out the MR2 balancer claiming it fit the ST185 as well (they are clearly different designs and not interchangeable) I traded a few emails with them regarding the fitment and differences but never heard any more than "we can make you a custom one for $$$", I see now they have a separate part number for the ST185 (804200-1 vs 804200 for the MR2) Here is the original post regarding the dampener fitting both: http://blog.rossperformanceparts.com/toyota-damper-suits-2nd-generation-3sgte-sw20-st185-and-a-3sge/ Excellent info. Thank you very much I'm currently in discussions with Garage7 (who in turn are talking to Ross Performance directly) |
Author: | Muddy Water [ Thu Aug 01, 2013 9:26 pm ] |
Post subject: | Re: Crank Pulley Question |
I think I have answered my own question... It appears that the one above is for an MR2 SW20 Rev2 http://www.fensport.co.uk/Parts/Model_28/Category_1/4343 and the one I need should look like this: http://www.fensport.co.uk/Parts/Model_18/Category_1/25 |
Author: | Muddy Water [ Mon Aug 05, 2013 7:38 pm ] |
Post subject: | Re: Crank Pulley Question |
Update... I sent through pictures and information and, as a result, I have just found out/had confirmed that Ross Performance DO NOT make a harmonic balancer pulley for the ST185 (They appear to market the MR2 one as fitting the ST185 which infact turns out to be incorrect). |
Author: | TrackToyFour [ Mon Aug 05, 2013 11:23 pm ] |
Post subject: | Re: Crank Pulley Question |
If you're worried about the lack of a harmonic balancer on your balanced crank why don't you just fit an OEM damped pulley? Seeing as its planned to be a sprint and circuit car then the revs will be up and down so you shouldn't have any problems even if you don't have a harmonic balancer fitted. Easy for me to say I know |
Author: | Meurz [ Tue Mar 10, 2015 12:22 am ] |
Post subject: | Re: Crank Pulley Question |
Bump. 185 oem pulley = 13407-88380 205 oem pulley = 13407-88480 Anyone happen to know the difference? |
Author: | darrylp [ Tue Mar 10, 2015 5:13 pm ] |
Post subject: | Re: Crank Pulley Question |
I'd guess weight, as pistons & rings are different between the 185 & 205, surely the weight to balance out harmonics would need to be different ? Darryl |
Author: | TrackToyFour [ Tue Mar 10, 2015 9:36 pm ] |
Post subject: | Re: Crank Pulley Question |
Meurz wrote: Bump. 185 oem pulley = 13407-88380 205 oem pulley = 13407-88480 Anyone happen to know the difference? 100 |
Author: | Meurz [ Wed Mar 11, 2015 1:28 pm ] |
Post subject: | Re: Crank Pulley Question |
darrylp wrote: I'd guess weight, as pistons & rings are different between the 185 & 205, surely the weight to balance out harmonics would need to be different ? Darryl Hmm, I need it for my TTE Corolla WRC crank with CP pistons, Carrillo rods and tbd flywheel/clutch Thanks for your help as well Don, I'm not good at math. |
Author: | TrackToyFour [ Wed Mar 11, 2015 10:40 pm ] |
Post subject: | Re: Crank Pulley Question |
Seriously tho Rene, not sure if the choice of crank pulley will make any real difference. The combination of TTE crank, Carillo rods, CP pistons and non-standard flywheel and crank will probably change the harmonics. The crucial thing is to get everything balanced during each phase of the build process. As you know, this is my setup too and we have simply fitted a standard ST205 crank pulley/damper. In any case, I'm highly unlikely to be holding constant rpm with my track use so I don't expect harmonics to be an issue. If you are planning on road use then I'm unsure of the consequences. |
Author: | Meurz [ Wed Mar 11, 2015 10:45 pm ] |
Post subject: | Re: Crank Pulley Question |
I know Don, I will have the whole assy balanced anyway once pieced together. I was just curious about physical differences between the 2 as I do want to retain a damper. Car will be used on road and track. |
Author: | Sunny [ Mon Jul 13, 2015 7:45 pm ] |
Post subject: | Re: Crank Pulley Question |
Hi, Rene, get your internals + block to http://www.rallye-engine.com/ he lives near the nl boarder and did my engine internals (bearings, balancing, pistons) he should be the right man to help you greetz |
Author: | Meurz [ Thu Aug 13, 2015 11:31 pm ] |
Post subject: | Re: Crank Pulley Question |
Thanks! Been drooling over his work on the Facebooks for a while now.. |
Page 2 of 2 | All times are UTC + 1 hour |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |