Author |
Message |
toger13
|
Posted: Sun Jan 24, 2016 4:50 pm |
|
|
New Poster |
Joined: Sat Jan 23, 2016 3:41 pm Posts: 3
Car Model: None
|
Hi Guys
I am looking at doing a bit of a project using a GT4 gearbox and transfer box
Im after a favour if some one could help, im after some basic measurements of the gearbox with transfer box before go out and splash 300 quid on a box to see if I can make it work
also what sort of power is the standard drive train good for?
Thanks Si
|
|
Top |
|
|
Sirius
|
Posted: Sun Jan 24, 2016 11:13 pm |
|
|
Club Staff |
|
Joined: Wed Jul 13, 2005 12:14 am Posts: 3265 Location: Camberley, Surrey
Car Model: ST205
|
What measurements are you after?
I would say the drivetrain is good for at least 500hp without any major dramas.
_________________ GT4DC Events Co-ordinator 1996 ST205 UK
|
|
Top |
|
|
toger13
|
Posted: Mon Jan 25, 2016 12:15 am |
|
|
New Poster |
Joined: Sat Jan 23, 2016 3:41 pm Posts: 3
Car Model: None
|
Hi Sirius
Thanks for the reply
Mainly after measurement from the bell housing the the outside of the box to check it will squeeze between my chassis legs also the main width of the box not including the transfer box would be handy
Thanks Si
|
|
Top |
|
|
toger13
|
Posted: Sat Jan 30, 2016 3:11 pm |
|
|
New Poster |
Joined: Sat Jan 23, 2016 3:41 pm Posts: 3
Car Model: None
|
Any body got one laying about? Lol
Thanks Si
|
|
Top |
|
|