www.gt4dc.co.uk http://www.gt4dc.co.uk/forum/ |
|
High Impedence injectors http://www.gt4dc.co.uk/forum/viewtopic.php?f=13&t=7697 |
Page 1 of 1 |
Author: | richardwalter [ Fri Jan 20, 2017 1:00 pm ] |
Post subject: | High Impedence injectors |
Looking to fit a set of new Sard 800 high Impedence injectors. What is the preferred method for removal and making good once the resistor pack has been removed?I've not done this but isn't it quite a simple procedure to remove the resistor pack, cut the flying lead off and join the main 12V feed to each of the 4 injector pins on the flying lead? I don't know if the resistor pack comes apart but for longevity you could look at opening it up and simply replacing the internal resistors with bridging wires. In hindsight it is probably sealed and potted? Thank you! About Me: I'm Richard, I have worked with multiple firms You can check (LINK REMOVED - ADMIN) ,one of my work. |
Author: | Sirius [ Fri Jan 20, 2017 3:13 pm ] |
Post subject: | Re: High Impedence injectors |
This looks like spam to me. |
Author: | Diceman [ Fri Jan 20, 2017 5:10 pm ] |
Post subject: | Re: High Impedence injectors |
Certainly his signature is. |
Author: | Sirius [ Fri Jan 20, 2017 11:11 pm ] |
Post subject: | Re: High Impedence injectors |
It is definitely spam - it would seem they are getting more sophisticated. The post above by 'richardwalter' is actually a combination of posts made by Betsy and Diceman back in March 2016: http://www.gt4dc.co.uk/forum/viewtopic.php?f=13&t=7568 |
Author: | бешаный 202 [ Sat Jan 21, 2017 6:03 am ] |
Post subject: | Re: High Impedence injectors |
What purpose does he have? |
Page 1 of 1 | All times are UTC + 1 hour |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |