www.gt4dc.co.uk :: View topic - EPC Picture Request

Hello,

Please could someone with access to the Toyota EPC possibly post a picture of the front suspension setup for an ST205 Japanese Import?

I need to check my suspension isn't missing anything else apart from the coil insulators I've found out I'm supposed to have....and don't.

I had the EPC on my old computer but it doesn't seem to work on my Vista PC. Maybe I should have asked Dell if their PC was Toyota compatible

Cheers!

Phil

Author:	PhilC [ Mon Feb 08, 2010 7:47 pm ]
Post subject:	EPC Picture Request
Hello, Please could someone with access to the Toyota EPC possibly post a picture of the front suspension setup for an ST205 Japanese Import? I need to check my suspension isn't missing anything else apart from the coil insulators I've found out I'm supposed to have....and don't. I had the EPC on my old computer but it doesn't seem to work on my Vista PC. Maybe I should have asked Dell if their PC was Toyota compatible Cheers! Phil

Author:	two_OH_five [ Mon Feb 08, 2010 8:30 pm ]
Post subject:
I don't think you could have too many bits missing - most are quite significant structural bits The only likely bits are :- 48157B/C Upper spring insulator 48158B/C Lower spring insulator 48331B/C "Bumper" or bumpstop as the rest of the word knows it Parts List

Author:	two_OH_five [ Mon Feb 08, 2010 8:33 pm ]
Post subject:
PS, I, er...I mean, this guy I know has the EPC running on Vista with no issues. Might be worth trying another install

Author:	PhilC [ Mon Feb 08, 2010 9:59 pm ]
Post subject:
Thanks for the picture, I think you may be correct I know my rear suspension has an insulator and a bumper stop but it doesn't look like my front suspension does!?!? Thanks again for your help! Phil

Author:	dale [ Thu Feb 18, 2010 2:27 pm ]
Post subject:
the bump stops can disintergrate over time, my front left was totally gone when i changed the springs but there was a tiny bit of knackered rubber on the drivers side, whilst both rears where intact, it will of been there at some point

www.gt4dc.co.uk http://www.gt4dc.co.uk/forum/

EPC Picture Request http://www.gt4dc.co.uk/forum/viewtopic.php?f=16&t=3420	Page 1 of 1

Author:	Wolf_Tm [ Thu Feb 18, 2010 9:41 pm ]
Post subject:	Re: EPC Picture Request
PhilC wrote: Hello, Please could someone with access to the Toyota EPC possibly post a picture of the front suspension setup for an ST205 Japanese Import? I need to check my suspension isn't missing anything else apart from the coil insulators I've found out I'm supposed to have....and don't. I had the EPC on my old computer but it doesn't seem to work on my Vista PC. Maybe I should have asked Dell if their PC was Toyota compatible Cheers! Phil Next time: http://www.toyodiy.com/parts/

Author:	two_OH_five [ Thu Feb 18, 2010 10:22 pm ]
Post subject:
It's a real bugger now they've taken the pictures down though It's alright if you know what you need (just) but if you're trying to find stuff that's missing it's a real yaris

Author:	Meurz [ Thu Feb 18, 2010 10:42 pm ]
Post subject:
two_OH_five wrote: if you're trying to find stuff that's missing it's a real yaris

Page 1 of 1	All times are UTC + 1 hour
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/