www.gt4dc.co.uk
http://www.gt4dc.co.uk/forum/

How did I not know about this stuff sooner!
http://www.gt4dc.co.uk/forum/viewtopic.php?f=16&t=7394
Page 1 of 1

Author:  niblettr [ Fri Jun 12, 2015 9:01 am ]
Post subject:  How did I not know about this stuff sooner!

https://www.google.co.uk/url?sa=t&rct=j&q=&esrc=s&source=web&cd=1&cad=rja&uact=8&ved=0CCMQuAIwAGoVChMI2uaZ5NeJxgIVA_EUCh3TlwAQ&url=http%3A%2F%2Fwww.youtube.com%2Fwatch%3Fv%3DRCrixbXz4rc&ei=XJF6VdrIEYPiU9OvgoAB&usg=AFQjCNG_LOaI5AKMM9CzwCn_6VdOdCTcDQ&sig2=X_SJx5WuZdpI7r1XRIAYcQ

Author:  Sirius [ Sat Jun 13, 2015 1:04 am ]
Post subject:  Re: How did I not know about this stuff sooner!

This looks a bit like 'lumiweld', whilst I have no technical knowledge the product has always been portrayed in a 'snakeoil ish' manner.

Probably best just using a proper TIG welder.

Author:  BecauseRaceCar [ Mon Jun 15, 2015 11:12 pm ]
Post subject:  Re: How did I not know about this stuff sooner!

Reminds me of Terminator 2
Why not spend a fiver and find out? here on ebay, for a price that's worth a gamble.

http://www.ebay.co.uk/itm/like/39087782 ... 0&ff14=108

Author:  two_OH_five [ Wed Jun 17, 2015 3:12 pm ]
Post subject:  Re: How did I not know about this stuff sooner!

I've used a similar product. I have to say that it did work on a few test pieces and when it got hold it was a strong bond but after a number of test pieces I only had about a 50% success rate in getting a good bond which ruled it out for me

Author:  niblettr [ Mon Aug 10, 2015 12:56 pm ]
Post subject:  Re: How did I not know about this stuff sooner!

BecauseRaceCar wrote:
Reminds me of Terminator 2
Why not spend a fiver and find out? here on ebay, for a price that's worth a gamble.

http://www.ebay.co.uk/itm/like/39087782 ... 0&ff14=108


I would do if I owned a blowtorch.. ;) (and if I had some ally kicking around to test on)

Author:  The Lorro [ Mon Aug 17, 2015 2:49 pm ]
Post subject:  Re: How did I not know about this stuff sooner!

BecauseRaceCar wrote:
Reminds me of Terminator 2


That's exactly what I thought when I saw it.

I didn't know such stuff existed, but it looks really useful for damaged alu parts.

Author:  BecauseRaceCar [ Mon Nov 02, 2015 11:47 pm ]
Post subject:  Re: How did I not know about this stuff sooner!

How about this then-Lazer cleaning....I want one!! https://www.youtube.com/watch?v=dZ_90920Zbg

Page 1 of 1 All times are UTC + 1 hour
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/