www.gt4dc.co.uk http://www.gt4dc.co.uk/forum/ |
|
How did I not know about this stuff sooner! http://www.gt4dc.co.uk/forum/viewtopic.php?f=16&t=7394 |
Page 1 of 1 |
Author: | niblettr [ Fri Jun 12, 2015 9:01 am ] |
Post subject: | How did I not know about this stuff sooner! |
https://www.google.co.uk/url?sa=t&rct=j&q=&esrc=s&source=web&cd=1&cad=rja&uact=8&ved=0CCMQuAIwAGoVChMI2uaZ5NeJxgIVA_EUCh3TlwAQ&url=http%3A%2F%2Fwww.youtube.com%2Fwatch%3Fv%3DRCrixbXz4rc&ei=XJF6VdrIEYPiU9OvgoAB&usg=AFQjCNG_LOaI5AKMM9CzwCn_6VdOdCTcDQ&sig2=X_SJx5WuZdpI7r1XRIAYcQ |
Author: | Sirius [ Sat Jun 13, 2015 1:04 am ] |
Post subject: | Re: How did I not know about this stuff sooner! |
This looks a bit like 'lumiweld', whilst I have no technical knowledge the product has always been portrayed in a 'snakeoil ish' manner. Probably best just using a proper TIG welder. |
Author: | BecauseRaceCar [ Mon Jun 15, 2015 11:12 pm ] |
Post subject: | Re: How did I not know about this stuff sooner! |
Reminds me of Terminator 2 Why not spend a fiver and find out? here on ebay, for a price that's worth a gamble. http://www.ebay.co.uk/itm/like/39087782 ... 0&ff14=108 |
Author: | two_OH_five [ Wed Jun 17, 2015 3:12 pm ] |
Post subject: | Re: How did I not know about this stuff sooner! |
I've used a similar product. I have to say that it did work on a few test pieces and when it got hold it was a strong bond but after a number of test pieces I only had about a 50% success rate in getting a good bond which ruled it out for me |
Author: | niblettr [ Mon Aug 10, 2015 12:56 pm ] |
Post subject: | Re: How did I not know about this stuff sooner! |
BecauseRaceCar wrote: Reminds me of Terminator 2 Why not spend a fiver and find out? here on ebay, for a price that's worth a gamble. http://www.ebay.co.uk/itm/like/39087782 ... 0&ff14=108 I would do if I owned a blowtorch.. (and if I had some ally kicking around to test on) |
Author: | The Lorro [ Mon Aug 17, 2015 2:49 pm ] |
Post subject: | Re: How did I not know about this stuff sooner! |
BecauseRaceCar wrote: Reminds me of Terminator 2 That's exactly what I thought when I saw it. I didn't know such stuff existed, but it looks really useful for damaged alu parts. |
Author: | BecauseRaceCar [ Mon Nov 02, 2015 11:47 pm ] |
Post subject: | Re: How did I not know about this stuff sooner! |
How about this then-Lazer cleaning....I want one!! https://www.youtube.com/watch?v=dZ_90920Zbg |
Page 1 of 1 | All times are UTC + 1 hour |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |