Im just about to fit some redstuff pads to the new 4 and replace the fluid with some DOT5. Question is what is the best way of replacing the fluid and ensuring i have removed all of the old stuff.
The 4 has ABS (not sure if this will make a difference to the quanity of fluid needed?)

Cheers
Rob

_________________
ST205




"And God said, Let the earth bring forth grass, and the earth brought forth grass and the Rastafarians smoked it."

Robbie, I would buy 2 litres of the new stuff your going to use, and just keep bleeding. You could try using a syringe to remove MOST of the fluid from the reservoir then fill with your new stuff. But remember never to let the reservoir run dry as that will make the bleeding much more difficult.

_________________
GT4DC Events Co-ordinator
1996 ST205 UK

Does the abs reservoir need bleeding to?

_________________
ST205




"And God said, Let the earth bring forth grass, and the earth brought forth grass and the Rastafarians smoked it."

No its all the same system. I have bled the brakes on my car about 4-5 times never used any special procedure.

Always found the 2 person method best aswell rather than one of these kit things.

_________________
GT4DC Events Co-ordinator
1996 ST205 UK

good oh - thanks chap!

_________________
ST205




"And God said, Let the earth bring forth grass, and the earth brought forth grass and the Rastafarians smoked it."