www.gt4dc.co.uk
http://www.gt4dc.co.uk/forum/

ST185 wiper blade mods
http://www.gt4dc.co.uk/forum/viewtopic.php?f=2&t=6197
Page 1 of 1

Author:  NoGT4 [ Tue Jan 08, 2013 4:31 pm ]
Post subject:  ST185 wiper blade mods

Hi,

I am in need of a full set of 185 wiper blades, but the screw ones seem pricy from Mr T.

Was thinking if fitting some of these, but look a bit ugly to me :?: but allows standard wipers to be fitted from most manufacturers.

http://cgi.ebay.co.uk/ws/eBayISAPI.dll? ... ink:top:en

So, what do you 185 owners have fitted.

Thanks for any feedback.

Cheers

Author:  Jon9985 [ Tue Jan 08, 2013 6:44 pm ]
Post subject:  Re: ST185 wiper blade mods

I use uniparts own brand, cheap and wipes well.

Author:  XLarge [ Tue Jan 08, 2013 10:42 pm ]
Post subject:  Re: ST185 wiper blade mods

Facelift versions of the T18 doesen´t have the srewed type wiper blades. If You ca pick up some cheap wiper arms of a late spec T18 You can use the more popular cliped type wiper blades without this urgly looking adapters.

Author:  Meurz [ Thu Jan 10, 2013 10:00 pm ]
Post subject:  Re: ST185 wiper blade mods

Ugly adapters? You won't even notice them as they are only a few cm small?
I bought universal Denso ones btw for my cars, which come with these adapters as well. Combined with a waxed windshield I can't complain!

Author:  XLarge [ Thu Jan 10, 2013 10:17 pm ]
Post subject:  Re: ST185 wiper blade mods

You needed adapters, René ? Normaly any CS had the newer version wiper arms with the u turn bend ends.

Author:  Meurz [ Thu Jan 10, 2013 10:36 pm ]
Post subject:  Re: ST185 wiper blade mods

Adapters are only on my WRC P8 Eric, but look very sleek and not in yo face ugly.

Author:  NoGT4 [ Thu Jan 10, 2013 11:33 pm ]
Post subject:  Re: ST185 wiper blade mods

I am just de-rusting my wiper arms, and noticed the original blades are offset anyway, and similar to the adaptors to hook I posted in the link.

Obviously I did not take a close look at the original ones on the car.

Back to Ebay I guess, they will probably be fine :D

Thanks for your comments and advice :D

Page 1 of 1 All times are UTC + 1 hour
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/