www.gt4dc.co.uk
http://www.gt4dc.co.uk/forum/

Pipe end location
http://www.gt4dc.co.uk/forum/viewtopic.php?f=2&t=7827
Page 1 of 1

Author:  audiodjmp77 [ Sun Jun 17, 2018 6:20 pm ]
Post subject:  Pipe end location

Evening All,

I am in the process of putting my crate back together after sorting out the wiring and found this pipe coming out of the heater box, but can't see where it is supposed to go. I want to at least get the car working electrically before getting it to Martin for the fuel pipe replacement, MOT testing and basically getting it back on the road.

F.A.O Mods,

How do I add pictures to my post ? Do I need to add them via a 3rd party provider ? If that is the case I'll add them to Flickr later

Author:  audiodjmp77 [ Sun Jun 17, 2018 7:06 pm ]
Post subject:  Re: Pipe end location

I have now found out where it looks like it goes. It looks like it goes to the lower part of the dash. It looks like it measures the temperature of the cabin when using the auto function of the A/C. One less thing to worry about, crack on next week.

Author:  Nibbles [ Tue Jul 03, 2018 9:22 pm ]
Post subject:  Re: Pipe end location

On 205's there is a cabin temperature sensor on the posh JDM heater control which is in a switch location below the steering wheel towards the centre console. This is also fed by a pipe from the heater system If this is left unconnected the temperature control becomes on-off. The 185 may be the same.

Author:  audiodjmp77 [ Thu Aug 30, 2018 7:13 pm ]
Post subject:  Re: Pipe end location

Cheers mate.

Page 1 of 1 All times are UTC + 1 hour
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/