I need to make up a couple of bridging wires for "Arsey" st185 RC

1) ac pipe pressure sensor has been removed and junked and I need to bridge two pins to stop the rad fans running constantly. Does anyone have any plug pins or know of a source.
2) code 54! Charge cooler has been removed and I'm getting code 54 as expected. I know I need to bridge the charge cooler level sensor, do I also need to install a pseudo charge cooler pump resistor on the 185? I'll need some pins for both if so!

I know I can cut wires and splice them together but I'd rather leave the loom/connectors in good state for now. Long term I have a spare look and ecu that will be stripped of redundant wires so I'd like to keep the standard look as standard as possible.

Any thoughts or comments welcome.

_________________
JP
GT4DC Treasurer

Grey St185 RC
Silver BMW E46 M3
Multicolour yawn Honda VFR400
Silver Honda Civic Type-R

I have found this place useful in the past for that kind of stuff:

http://www.bmotorsports.com/shop/

Most of the Toyota stuff is Sumitomo.

_________________
GT4DC Events Co-ordinator
1996 ST205 UK

Cheers Mike,
A good source of bits.

I have found these guys who also do a range of Toyota plugs (just purchased some COP connectors from them):- http://www.shopbhp.com/collections/connectors?page=2

_________________
JP
GT4DC Treasurer

Grey St185 RC
Silver BMW E46 M3
Multicolour yawn Honda VFR400
Silver Honda Civic Type-R