www.gt4dc.co.uk
http://www.gt4dc.co.uk/forum/

pins for engine related electrical components / code 54
http://www.gt4dc.co.uk/forum/viewtopic.php?f=9&t=7556
Page 1 of 1

Author:  Diceman [ Fri Feb 05, 2016 12:15 pm ]
Post subject:  pins for engine related electrical components / code 54

I need to make up a couple of bridging wires for "Arsey" st185 RC

1) ac pipe pressure sensor has been removed and junked and I need to bridge two pins to stop the rad fans running constantly. Does anyone have any plug pins or know of a source.
2) code 54! Charge cooler has been removed and I'm getting code 54 as expected. I know I need to bridge the charge cooler level sensor, do I also need to install a pseudo charge cooler pump resistor on the 185? I'll need some pins for both if so!

I know I can cut wires and splice them together but I'd rather leave the loom/connectors in good state for now. Long term I have a spare look and ecu that will be stripped of redundant wires so I'd like to keep the standard look as standard as possible.

Any thoughts or comments welcome.

Author:  Sirius [ Fri Feb 05, 2016 1:42 pm ]
Post subject:  Re: pins for engine related electrical components / code 54

I have found this place useful in the past for that kind of stuff:

http://www.bmotorsports.com/shop/

Most of the Toyota stuff is Sumitomo.

Author:  Diceman [ Fri Feb 05, 2016 2:54 pm ]
Post subject:  Re: pins for engine related electrical components / code 54

Cheers Mike,
A good source of bits.

I have found these guys who also do a range of Toyota plugs (just purchased some COP connectors from them):- http://www.shopbhp.com/collections/connectors?page=2

Page 1 of 1 All times are UTC + 1 hour
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/